HANNOVER MESSE 2018,
23. - 27. April
zwischen 10 Mio und 50 Mio EUR
PROTECTION AND MONITORINGweiterlesen
HV/MV SUBSTATION AUTOMATIONweiterlesen
UP RMU RGDATweiterlesen
This equipment is made for aerials lines with insulating conductors and raw conductors; it's in compliance with the standard IEC 298.
The equipment can be supply with the bushings in cycloaliphatic resin, (only aerials lines with raw conductors) or with bushings external cone, in compliance with the ...weiterlesen
RGE medium voltage switchgear for indoor use is constructed by placing standardised units side by side in a coordinated way. Each unit is composed of prefabricated free-standing enclosures in galvanized or painted sheet-steel.
RGE switchgear is pre-set for the following devices:
- «G6» type SF6 gas ...weiterlesen
THREE POLE VCBweiterlesen
The RMU24 is a SF6 insulated compact switchboard. It is a switchgear and circuit breakers equipped with disconnector "IMS" on the line stall and IMS with fuses on the protection stall processor.
The compact switchboard RMU24 is a device intended to be installed from inside the secondary distribution ...weiterlesen
RMU24-E is composed by an enclosed switchgear and switches disconnector called «IR3» and a mechanical panel control. Three position switches disconnectors and copper bus bar are insulated in SF6 gas into a stainless steel tank; the SF6 gas pressure into stainless steel tank is 135 kPa and is sealed for ...weiterlesen
RMU24 VCB has a completely sealed system with a stainless steel tank containing all the live parts and switching functions. The covering is TIG welded and filled with sulphur hexafluoride (SF6). It has been designed in order to withstanding internal overpressures and external mechanical loads, without ...weiterlesen
Auf der Merkliste