ACTIVE CARBON TOWER
Use of active carbon tower is an requirement for sectors like medical, medicine, electronic, metal foundry, where use of sensitive technology is needed. AAG active carbon towers are single tower pressurised vessels, which are filled with active carbon absorbents that remove the oil vapour within the pressurised air. Other hydrocarbon vapours are also absorbed by the active carbon. Active carbon is activated by the absorbing contaminants that are on the surfaces of the internal holes. This process continue until it reaches to its saturation point. When it reaches at its saturation point, then the active carbon should be replaced.
For complete installation only pipe connection is required.
Features of the tower ;
1- Long life when faced with high level of oil vapour input.
2- It removes the oil odour and oil vapour that is contained with the pressurised air.
3- It provides less than 0.01 ppm w/w oil vapour amount at the outlet.
4- Carbon bed withstands more than 8.800 hours.( inlet air at 37°C saturated with oil vapour at the related flow rate )
5- The design of the tower prevents the movement of bed and failing/contaminating of the carbon at maximum flow rates.
6- Wide beds provide for the required times to reach at the required oil vapour ratio ( 0.01 ppm w/w ) at the outlet.
7- Separate filling and discharge openings make replacement of the carbon easy, hence pipe/pipe line is not required in order to separate/disconnect.