HANNOVER MESSE 2018, 23 - 27 April
Homepage>Exhibitors & Products >CAN-Interface: CAN-USB/Micro mit DSUB9

CAN-Interface: CAN-USB/Micro mit DSUB9

esd electronics

Exhibitor details
Logo CAN-Interface: CAN-USB/Micro mit DSUB9

Exhibition stand

Hall 9, Stand F17

Mr. Sales-Team
Send E-mail
Fax: +49 511 3729868

Product description

The CAN-USB/Micro is a very small CAN-USB interface that fits into
a DSUB9 enclosure. The ARM Cortex-M3 micro controller controls
CAN data.
The non isolated CAN interface is directly powered by USB.

The module supports the USB 2.0 full-speed interface with data rates up to 12 MBit/s.

A Windows driver (NTCAN-API), with the usage limited to one
application at a time for Windows XP / Vista / 7 (32/64 Bit) and esd's
CAN Tools are in the scope of delivery.
A Windows driver with full featured NTCAN-API support is available as an option.

Product website

All products offered by this exhibitor



Ideal for fast steering and control tasks f.e. in EtherCAT applicationread more



CAN Bridges for wireless connection of two CAN Networksread more



CompactPCI® Serial (PCIe®) Board with 2 CAN Interfacesread more


XMC-/PMC- CAN-FD Interface-Board

New Mezzanine-Boards developed by esdread more

CAN-Interface: CAN-USB/400

2x CAN (Layer 2, CANopen®, J1939 oder ARINC 825)read more

CAN-Interface: CAN-USB/2

The CAN-USB/2 module is an intelligent CAN-interface with a ARM 7 microcontroller for the local management of CAN-data. The module supports the USB 2.0 High Speed interface with data rates of 480 Mbit/s. The ISO 11898-compliant CAN-interface allows a data-transfer rate of a maximum of 1 Mbit/s. The more

CAN-Interface: CAN-USB/Micro mit DSUB9

The CAN-USB/Micro is a very small CAN-USB interface that fits into a DSUB9 enclosure. The ARM Cortex-M3 micro controller controls CAN data. The non isolated CAN interface is directly powered by USB. The module supports the USB 2.0 full-speed interface with data rates up to 12 MBit/s. A Windows driver more

CAN-Interface: CAN-PCIe/402-FD

PCI Express® Board with 1 or 2 CAN FD Interfacesread more

CAN-Interface: CAN-PCIe/402

Single Lane PCIe Board with Altera FPGA for up to 4x CAN -1x, 2x or 4x CAN interfaces according to ISO 11898-2 -Bus mastering and local data management by FPGA -PCIe® interface according to PCI Express Specification R1.0a -Supports MSI (Message Signaled Interrupts) -Selectable CAN termination on board Wide more

CAN-Interface: CAN-PCI/402

1, 2 or 4 Channel PCI-CAN Interface (Layer 2, CANopen® or J1939)read more

CAN-Interface: AMC-CAN/4

The AMC-CAN4 features four CAN High-Speed interfaces according to ISO 11898-2. The CAN interfaces are electrically isolated against the controller potential and against each other. CAN status is displayed by two LEDs for each CAN channel placed at the RJ45 connectors. The four independent CAN nets according more

CAN-Interface: AMC-ADIO24 24-Channel I/O

The AMC-ADIO24 is equipped with a Spartan FPGA that manages the I/O data exchange in cooperation with the PCIe bridge. FIFOs for input and output direction and DMA to the PCIe host PCUs memory minimizes undesired latency during PCIe read cycles at higher data rates. Read cycles of the PCIe CPU are reduced more


VME Master CPU with 64-bit PowerPC(TM) T1022 and XMC/PMC Slotsread more

Gateway: CAN-to-Cloud

Connects CAN Bus to Microsoft® Azure® Cloud via Ethernetread more

Gateway: EtherCAN/2, CAN/Ethernet

The EtherCAN/2 is a gateway to transmit data between CAN and Ethernet. The module is designed for hat-rail mounting in a control enclosure as a backward compatible replacement for the EtherCAN gateway (C.2050.02). In Bridge Mode two EtherCAN/2 can be used to connect two CAN nets via TCP/IP. One Ethernet more

Gateway: CAN-EtherCAT, EtherCAT/CAN

The CAN-EtherCAT module links any EtherCAT network to a CAN network. The gateway operates as an EtherCAT slave with a maximum of 8 Kbytes input or output data on the EtherCAT bus. With the CAN gateway you can connect CAN modules with CANopen (CiA DS 301) or layer-2 (ISO 11898-1) implementation to a more

Gateway: ECX-EC (EtherCAT® Slave Bridge)

The ECX-EC connects two EtherCAT segments. Therefore the EtherCAT slave bridge implements two seperate EtherCAT slave interfaces for integration into two EtherCAT networks. The bridge allows EtherCAT process data exchange between the networks. For synchronization of Distributed Clocks (DC) it offers more


PCI Express® /EtherCAT® Slave Interfaceread more


XMC EtherCAT® Slave Interfaceread more


The module CAN-PN can link any PROFINET-IO controller to a CAN network. The CAN-PN gateway itself operates as a PROFINET IO device with a maximum of 1440 bytes input data and 1440 bytes output data on the PROFINET bus. The CAN-PN connects CAN modules with CANopen (CiA DS 301) or layer-2 (ISO 11898-1) more

Gateway: CANopen-PN

PROFINET IO® / CANopen® Gatewayread more


The module CAN-DP can link any Profibus- DP master to a CAN network. The DP/CAN gateway operates as a slave-I/O component with a total of maximum 300 bytes process data (up to 244 bytes input and 56 bytes output or up to 244 bytes output and 56 bytes input data) on the DP-bus. With the CAN gateway you more

Gateway: CANopen-DP/2

Gateway CANopen® to PROFIBUS-DP® Slaveread more

EtherCAT: ECX-Master-Selector

esd in Hannover, Germany presents a new and innovative EtherCAT switch module. Triggered by a simple switching signal (LAN selector switch), the ECX-Master-Selector can connect an EtherCAT network to two different EtherCAT masters with cable redundancy to build up a redundancy at the EtherCAT Master more

EtherCAT: MasterStack, embedded realtime

EtherCAT Master Stack for embedded (real time) OS, written in ANSI-C for high performance, small resource usage and scalability. Core components are operating system (OS) and CPU architecture independent. Master instances can use the same NIC to address independent EtherCAT segments via Ethernet switch more

EtherCAT: Workbench/Tool

The EtherCAT Workbench is a comprehensive EtherCAT configuration and diagnostic tool to create network configuration files, initialize and monitor an EtherCAT network. The application supports an offline as well as an online mode. Key features: - Built-in EtherCAT master to support an online topology more

EtherCAT: Slave Stack

The EtherCAT® Slave Stack is a software stack for the easy development of embedded slave devices written in ANSI C. It's available as source code optimized for high performance and low resource usage. With the cross-platform API the parallel development of the embedded device hardware and application more

EtherCAT: Starterkit

with IO Module ECX-DIO8, EtherCAT Workbench and EtherCAT Master Stackread more

I/O-Modul: ECX-DIO8, EtherCAT, digital

The ECX-DIO8 module is equipped with 8 digital I/Os, each available as input and output. The nominal I/O-voltage value is 24 V. Nominal output current is 0.5 A at 24 V. The ECX-DIO8 module provides industrial digital in-/outputs with two-wire connection in combination with service-friendly wiring more

I/O Modul: CAN-CBX Serie, CANopen/InRail

The new CAN-CBX series with In-Rail-Bus provides industry compatible CAN bus in-/output modules in combination with service-friendly "wiring" of CAN bus and supply voltage. The CANopen-node number and the CAN-bit rate ca be easily set via coding switches. The power supply and the CAN bus signals can more

Stored items


Server communication error: Item could not be saved.