Advertisement
HANNOVER MESSE 2018, 23 - 27 April

CAN-USB/400

2x CAN (Layer 2, CANopen®, J1939 oder ARINC 825)

esd electronics

Exhibitor details
Logo CAN-USB/400

Exhibition stand
(Main stand)

Contact(s)
Mr. Sales-Team
Send E-mail
Fax: +49 511 3729868

Product description

Two High-Speed CAN Interfaces for USB
- CAN interfaces according to ISO 11898-2 with electrical isolation
- Powered by esd Advanced CAN Core (esdACC) implemented in an FPGA
- Capable of 100% CAN bus load

Robust and Easy to Handle
- Power supply by USB
- Aluminium case
- Incl. USB cable

Advanced Diagnostics and Timestamping
- Enhanced diagnostic features
- CAN error injection capabilities
- High resolution hardware timestamping
- CAN interfaces share common time base

Product website

All products offered by this exhibitor

VME-CPU/T10

VME Master CPU with 64-bit PowerPC T1022 and XMC/PMC Slots High-End PowerPC QorIQ CPU - VME master CPU A16/A24, D16/D8 (EO) and SGL arbiter - NXP PowerPC QorIQ T1022, 1.2 GHz, 64-bit architecture, Double Precision Floating Point Unit, Ethernet, ECC-RAM - Altera® Cyclone V FPGA for VME interface - ...read more

CPCIserial-CAN/402

Data Sheet CPCIserial-CAN/402read more

CAN-PCIe/402-FD

Single Lane PCIe Board with Altera® FPGA - 1x or 2x CAN-FD interfaces according to ISO 11898-2 - CAN bit rates from 10 kbit/s up to 5 Mbit/s with the same CAN transceiver - Bus mastering and local data management by FPGA - PCIe® interface according to PCI Express Specification R1.0a - Selectable CAN ...read more

CAN-to-Cloud Gateway

Data sheet CAN-to-Cloudread more

EtherCAT Starterkit

with IO Module ECX-DIO8, EtherCAT Workbench and EtherCAT Master Stackread more

CAN-USB/400

Two High-Speed CAN Interfaces for USB - CAN interfaces according to ISO 11898-2 with electrical isolation - Powered by esd Advanced CAN Core (esdACC) implemented in an FPGA - Capable of 100% CAN bus load Robust and Easy to Handle - Power supply by USB - Aluminium case - Incl. USB cable Advanced Diagnostics ...read more

CANopen-DP/2

Gateway CANopen® to PROFIBUS-DP® Slaveread more

CANopen-PN

PROFINET IO® / CANopen® Gatewayread more

ECS-XMC/FPGA

XMC EtherCAT® Slave Interfaceread more

ECX-Master-Selector (EtherCAT Master Switch for 2 redundant Masters)

esd in Hannover, Germany presents a new and innovative EtherCAT switch module. Triggered by a simple switching signal (LAN selector switch), the ECX-Master-Selector can connect an EtherCAT network to two different EtherCAT masters with cable redundancy to build up a redundancy at the EtherCAT Master ...read more

CAN-PCIe/402 (PCI Express Board with up to 4 CAN interfaces)

Single Lane PCIe Board with Altera FPGA for up to 4x CAN -1x, 2x or 4x CAN interfaces according to ISO 11898-2 -Bus mastering and local data management by FPGA -PCIe® interface according to PCI Express Specification R1.0a -Supports MSI (Message Signaled Interrupts) -Selectable CAN termination on board Wide ...read more

EtherCAN/2 (CAN Ethernet Gateway)

The EtherCAN/2 is a gateway to transmit data between CAN and Ethernet. The module is designed for hat-rail mounting in a control enclosure as a backward compatible replacement for the EtherCAN gateway (C.2050.02). In Bridge Mode two EtherCAN/2 can be used to connect two CAN nets via TCP/IP. One Ethernet ...read more

CAN-DP/2 (CAN to PROFIBUS-DP® Slave Gateway)

The module CAN-DP can link any Profibus- DP master to a CAN network. The DP/CAN gateway operates as a slave-I/O component with a total of maximum 300 bytes process data (up to 244 bytes input and 56 bytes output or up to 244 bytes output and 56 bytes input data) on the DP-bus. With the CAN gateway you ...read more

CAN-USB/Micro (small CAN USB Interface in DSUB9 Enclosure)

The CAN-USB/Micro is a very small CAN-USB interface that fits into a DSUB9 enclosure. The ARM Cortex-M3 micro controller controls CAN data. The non isolated CAN interface is directly powered by USB. The module supports the USB 2.0 full-speed interface with data rates up to 12 MBit/s. A Windows driver ...read more

ECX-EC (EtherCAT Slave Bridge)

The ECX-EC connects two EtherCAT segments. Therefore the EtherCAT slave bridge implements two seperate EtherCAT slave interfaces for integration into two EtherCAT networks. The bridge allows EtherCAT process data exchange between the networks. For synchronization of Distributed Clocks (DC) it offers ...read more

EtherCAT Workbench (Configuration- and Diagnostic Tool)

The EtherCAT Workbench is a comprehensive EtherCAT configuration and diagnostic tool to create network configuration files, initialize and monitor an EtherCAT network. The application supports an offline as well as an online mode. Key features: - Built-in EtherCAT master to support an online topology ...read more

ECS-PCIe/FPGA

PCI Express® /EtherCAT® Slave Interfaceread more

EtherCAT Slave Stack

The EtherCAT® Slave Stack is a software stack for the easy development of embedded slave devices written in ANSI C. It's available as source code optimized for high performance and low resource usage. With the cross-platform API the parallel development of the embedded device hardware and application ...read more

CAN-CBX-series (CAN-Input/Output Modules with InRailBus)

The new CAN-CBX series with In-Rail-Bus provides industry compatible CAN bus in-/output modules in combination with service-friendly "wiring" of CAN bus and supply voltage. The CANopen-node number and the CAN-bit rate ca be easily set via coding switches. The power supply and the CAN bus signals can ...read more

CAN-USB/2 (CAN USB 2.0 interface)

The CAN-USB/2 module is an intelligent CAN-interface with a ARM 7 microcontroller for the local management of CAN-data. The module supports the USB 2.0 High Speed interface with data rates of 480 Mbit/s. The ISO 11898-compliant CAN-interface allows a data-transfer rate of a maximum of 1 Mbit/s. The ...read more

AMC-CAN/4 (AMC-CAN module)

The AMC-CAN4 features four CAN High-Speed interfaces according to ISO 11898-2. The CAN interfaces are electrically isolated against the controller potential and against each other. CAN status is displayed by two LEDs for each CAN channel placed at the RJ45 connectors. The four independent CAN nets according ...read more

AMC-ADIO24 (AMC Analog/Digital I/O Modul)

The AMC-ADIO24 is equipped with a Spartan FPGA that manages the I/O data exchange in cooperation with the PCIe bridge. FIFOs for input and output direction and DMA to the PCIe host PCUs memory minimizes undesired latency during PCIe read cycles at higher data rates. Read cycles of the PCIe CPU are reduced ...read more

ECX-DIO8 (EtherCAT digital I/O module)

The ECX-DIO8 module is equipped with 8 digital I/Os, each available as input and output. The nominal I/O-voltage value is 24 V. Nominal output current is 0.5 A at 24 V. The ECX-DIO8 module provides industrial digital in-/outputs with two-wire connection in combination with service-friendly wiring ...read more

EtherCAT-Master Stack for embedded (real-time) OS

EtherCAT Master Stack for embedded (real time) OS, written in ANSI-C for high performance, small resource usage and scalability. Core components are operating system (OS) and CPU architecture independent. Master instances can use the same NIC to address independent EtherCAT segments via Ethernet switch ...read more

CAN-PN (PROFINET-I/O / CAN Gateway)

The module CAN-PN can link any PROFINET-IO controller to a CAN network. The CAN-PN gateway itself operates as a PROFINET IO device with a maximum of 1440 bytes input data and 1440 bytes output data on the PROFINET bus. The CAN-PN connects CAN modules with CANopen (CiA DS 301) or layer-2 (ISO 11898-1) ...read more

CAN-EtherCAT (Gateway EtherCAT/CAN)

The CAN-EtherCAT module links any EtherCAT network to a CAN network. The gateway operates as an EtherCAT slave with a maximum of 8 Kbytes input or output data on the EtherCAT bus. With the CAN gateway you can connect CAN modules with CANopen (CiA DS 301) or layer-2 (ISO 11898-1) implementation to a ...read more

CAN-AIR/2 (Wireless CAN-Bridge with USB Interface)

The CAN-AIR/2 is designed for bridging two different CAN networks via a radio link. It supports data exchange between CAN nets with two different baud rates. This stand-alone mode can be used e.g. to get access to CAN modules installed at turning machine parts or replacement of "slip rings" via a point-to-point ...read more

Stored items

0

Server communication error: Item could not be saved.