HANNOVER MESSE 2018, 23 - 27 April
Homepage>Exhibitors & Products >CMC 353 protection testing device

CMC 353 protection testing device

Compact and versatile three-phase relay testing solution

OMICRON electronics

Exhibitor details
Logo CMC 353 protection testing device

Product description

With its compact design and low weight of 12.9 kg / 28.4 lbs, the CMC 353 provides the perfect combination of portability and power. It is the ideal test set for three-phase protection testing and the commissioning of SCADA systems. The powerful current outputs (3 x 32 A / 430 VA) optimally support 5 A relay testing.

The portable design makes this test set an excellent choice for commissioning and maintenance tasks, particularly in industry, distributed generation, and medium and low voltage applications. The CMC 353 meets a wide variety of challenges in protection engineering - from testing electromechanical relays to the latest IEC 61850 IEDs.

Key features
- Compact design and light weight
- High current amplitudes for 5 A relay testing
- Powerful current sources for testing electromechanical relays
- High accuracy and versatility for testing static and numerical relays
- Integrated network for testing IEC 61850 IEDs

Product website

All products offered by this exhibitor

CMC 430

With its low weight of just 8.7 kg / 19.2 lbs the CMC 430 is the preferred choice for test engineers in cases where excellent transportability is needed and three currents up to 12.5 A or six voltage outputs are more


Software tool for visualizing IEC 61850 Sampled Valuesread more

CMS 356 Voltage and current amplifier

The CMS 356 is a voltage and current amplifier for analog low-level signals provided by a CMC test set or by any other signal source, such as a digital real-time power system network simulator. When used in combination with a CMC test set, the amplifier extends the capabilities of the test set to provide more


Winner of the iF Design Award 2017 in the discipline Products, category Industry & Skilled Trades COMPANO 100 is the universal and easy to use solution for all types of basic testing duties in electrical energy systems. Controlled electronic sources allow the user to obtain exactly the desired value more

ARCO 400

Universal test set for recloser controlsread more


Three-phase power transformer test systemread more

Testing Solutions for Recloser Controls

OMICRON offers a comprehensive range of testing solutions and the relevant adapters or cable packages (accessory to protection test sets) for testing various recloser and sectionalizer controls. For a broad range of applications in this field, ARCO 400 (our dedicated plug-and-play recloser test set) more


TANDO 700 system offers precise measurement of dissipation/ power factor (Tan Delta) and capacitance for testing insulation in high-voltage equipment. TANDO 700 also measures power, current, voltage, impedance and frequency. The easy-to-use software offers various functions for real-time data display, more


Hybrid signal analyzer for power utility automation systemsread more

CMC 310 Protection Testing Device

This video will show you the easy and intuitive use of modern protection testing tools even when rarely used. Please find more interesting product and application videos in various languages under: more

RelaySimTest protection testing software

Zeiteffiziente, simultane Prüfung beider Relais und deren Kommunikationsverbindung. Weitere interessante Videos in vielen Sprachen zu Produkten und Anwendungen finden Sie auf unserem Youtube-Kanal: more

OMS 605

The OMS 605 is a portable partial discharge (PD) monitoring system designed for inspections of high-voltage assets under load. It can be employed for temporary and periodic, condition-based monitoring. Measurements are performed at the assets one after the other. The OMS 605 can be easily connected to more


On-line partial discharge monitoring system for rotating machinesread more

OMS 800

The OMS 800 system is designed to perform partial discharge (PD) after-installation testing and continuous monitoring of HV XLPE cable systems, either in underground tunnels or at buried cables. It can detect and locate partial discharges in cables and accessories (joints, terminations) simultaneously. The more


VOTANO 100 can test all important parameters of voltage transformers quickly and with minimum rewiring. The measured results are automatically assessed in accordance with IEEE and IEC standards. Using VOTANO 100 voltage transformers up to 0.1 accuracy class can be calibrated in the field in less than more

CMControl R

The CMControl R is a front panel control for CMC protection test sets specifically designed for testing recloser and sectionalizer controls with the protection testing devices CMC 356, CMC 353, CMC 256plus, and CMC 256-6. With its comprehensive software tools, the intuitive touchscreen control concept more


Dieses Video zeigt Ihnen wie Sie die Daten ihres Schutzsystems mit ADMO verwalten. Weitere interessante Videos in vielen Sprachen zu Produkten und Anwendungen finden Sie auf unserem Youtube-Kanal: more

ISIO 200

ISIO 200 is a simple and versatile binary I/O terminal for Substation Automation Systems (SAS). It communicates via IEC 61850 GOOSE messages and, therefore, interoperates with a wide range of intelligent electronic devices (IED) or CMC test sets supporting GOOSE. Integrate ISIO 200 as a component in more

CMControl P and CMControl P App

The simple and easy way of manual protection testingread more

Primary Test Manager Software (PTM)

The Primary Test ManagerTM (PTM) is the ideal software tool for diagnostic testing of power transformers, current transformers, and circuit breakers. PTM guides the user through the testing process with easily comprehensible testing procedures and detailed wiring diagrams. Tests can be automatically more


Test system for medium- and high-voltage circuit breakersread more


The versatile tool for working with IEC 61850 IEDsread more


Simulation-based type and acceptance testingread more


The CPC 100 + CP CU1 measure line impedances and k-factors on overhead lines and power cables. Ground impedances can also be determined on large systems with the CP CU1, as well as touch and step voltages. Mains frequency malfunctions do not influence the measurements, as the CPC 100 + CP CU1 use variable more

PDL 650

System for acoustic partial discharge localizationread more


The CMControl is a PC-independent control alternative for CMC protection test sets, specifically designed for quick manual protection testing in the field. The device can either be attached to the CMC test set or be detached and used as a flexible handheld control. The CMControl supports the following more

CMC 850 protection testing device

The CMC 850 is OMICRON's protection test set dedicated to IEC 61850. It focuses on the real-time communication methods of GOOSE and Sampled Values to interface with the devices under test. Like all other CMC test sets, the CMC 850 is controlled by OMICRON's proven Test Universe software. It also offers more

CMC 353 protection testing device

With its compact design and low weight of 12.9 kg / 28.4 lbs, the CMC 353 provides the perfect combination of portability and power. It is the ideal test set for three-phase protection testing and the commissioning of SCADA systems. The powerful current outputs (3 x 32 A / 430 VA) optimally support 5 more


Combined with the CPC 100, the CP TD1 measures the capacitance and dissipation factor (power factor) with laboratory precision. This allows the insulation condition of transformers, generators and other parts of high-voltage systems to be tested according to IEEE 62 (C57.152), IEC 60076-1 and -3, as more

MPD 500

The MPD 500 simplifies measurement of partial discharges in electrical insulation. The system has been specially developed for routine tests and tests with high throughput. The decisions required for this are supported by the clearly structured pass/fail functionality. The highest degree of safety is more

Switch Box CP SB1

The CP SB1 is an accessory for the CPC 100 and simplifies measurement of three-phase power transformers. The transformer ratio and winding resistance are automatically measured in all three phases (in sequence) in all tap changer positions. The measurement results are recorded by the CPC 100 and can more

CPC 100

Universal testing device for electrical diagnosticsread more

MPD 600

The MPD 600 is a highly developed device for measuring partial discharges (PD). With excellent tools, even the smallest PD pulses are separated from interference and analyzed. The MPD 600 is suitable for many different PD testing applications. Cable, transformer and machine manufacturers use the MPD more


Sweep frequency response analyzerread more


FDS-PDC Dielectric Response Analyzerread more

CT Analyzer

The CT Analyzer automatically determines all relevant current transformer values and compares the results with the selected standard. The device evaluates the current transformer as per the IEC or IEEE standard within seconds with the push of a button. It facilitates fast and economical on-site testing more

CMC 256plus protection testing device

The CMC 256plus is the first choice for applications requiring very high accuracy. This unit is not only an excellent test set for protection devices of all kinds but also a universal calibrator. Its high precision allows the calibration of a wide range of measuring devices, including: energy meters more

CMC 356 protection testing device

The CMC 356 is the universal protection test solution for testing all generations and types of protection relays. Its powerful six current sources (three-phase mode: up to 64 A / 860 VA per channel) with a great dynamic range, make the unit capable of testing even high-burden electromechanical relays more

Stored items


Server communication error: Item could not be saved.