HANNOVER MESSE 2019,
01 - 05 April
Hoesch Schwerter Profile
The process of cold drawing is a procedure by which the metal is formed in order to achieve complex profile cross sections of excellent precision. After careful pre-treatment and descaling the special profile bars are drawn through a forming die. This operation can be repeated up to three or four times.
Cold drawing of hot rolled and hot extruded special profiles tightens the cross-section tolerances, thus leading to significant improvement in dimensional accuracy and surface quality. Cold drawn special profiles offer the same precision achieved by machining - but without the waste.
Cold drawn special profiles offer extensive
advantages, among other things:
- smooth and scale-free surface
- sharp edges
- uninterrupted grain orientation
- increased tensile strength and yield point
- circumscribed circle up to approx. 200 mm Ø; for flat steel up to 300 mm wide
- minimum wall thickness: 4 mm
- up to 11,000 mm (depending on profile cross section), with sawn ends (fixed lengths by agreement)
Weight per meter:
- minimum c. 1.5 kg/m
- maximum c. 120 kg/m
Cross-sectional tolerances/Straighteness tolerances:
- Dimensional tolerances by agreement up to 0.05 mm, depending on cross- section and materials
- Straightness tolerances and twist: 1mm/m on supply length or by special agreement
- cold drawn
- nearly all quality and stainless steels in the iron and steel list, special steels, non-ferrous heavy metal alloys
- all required heat treatments are available
Italien Pavilion - CALVI
During hot extrusion a round steel billet is pre-heated and, after leaving the furnace, is pushed throuh a forming die into a profile bar using a ram with an extrusion ...
During the production of special profiles by hot rolling the input billet or slab is formed into lengths up to 70 m using two oppositely rotating cylindrical rolls. ...