Advertisement
HANNOVER MESSE 2018, 23 - 27 April
Homepage>Exhibitors & Products >Condenser extension module CEM 2

Condenser extension module CEM 2

Schneider, J. Elektrotechnik

Exhibitor details
Logo Condenser extension module CEM 2

Product description

The CEM-module is used to increase the back-up energy of the C-TEC2403 devices in AC- and DC- .
Charging and discharging of the extension modules is controlled and monitored by the C-TEC 2403
respectively. AC C-TEC 2403.

Product website

Download(s)

All products offered by this exhibitor

DRIVE-UPSTEC

The DRIVE-UPSTEC is built of the main components AEMTEC and ultracapacitor modules. The actvie energy manage AEMTEC is ain intelligent DC-actuator to Support the intermediate circuit of frequency drives. With the combination of the two main components the DRIVE-UPSTEC offers a lot of Advantages for the ...read more

TRETEC N

DC-UPS catalogeread more

C-TEC 2440P

With the introduction of the C-TEC 2440 P the C-TEC series is increased up to 40A. The nominal input voltage amounts to 24 V +/- 10 %, the output voltage lies between 25.5 and 19 V, depending on the load and the state of charge. The unit provides a nominal output current of 40 A, but a short-time peak ...read more

AC C-TEC 2410-10

The series of the buffer power supplies based on ultracapacitors is now complete. The following devices are now available: AC C-TEC 2403-1 AC C-TEC 2410-10 AC C-TEC 2420-8 Most of the important data of the respective devices can be identified with the name. "AC" stands for single-phase or three-phase ...read more

Power Supplies and UPS

The DC-UPS-systems of the AKKUTEC-series of J. Schneider can also be called "true all-rounder". With the integragted UPS function it is suitable as well for the safe power supply as for the total battery management such as battery charging, battery control and the battery test of a connected battery. ...read more

C-TEC 2425P

DC-UPS catalogeread more

UCC-TEC

The UCC-TEC (Ultra Capacitor Charger) is a charger for the J. Schneider Ultracapacitor modules 10F/90V (UC-Modul). There are several possiblities to connect the individual modules: From a single module 90V up to five modules with 450V. The device is used in a pitch system of a wind energy plant, where ...read more

UNOTEC N

The devices are characterized by high efficiency and minimal power loss. They have a power boost . With the help of this power turbos and bigger loads and capacities can be supplied with up to 150% of the rated current of the Unotec 's up to 4 seconds . They offer high power failure bridging time > 20ms ...read more

Decoupling modul KGEK002S003M92

Decoupling diode set, consisting of a double Schottky diode on a potentialfree cooler with cover against direct contact and top-hat rail clamb. Type: KGEK002S003M92 Art.-No.: 59610.1 limitin average on state current: ...read more

Duplication module KGEK006S001M92

Decoupling diode set, consisting of a double Schottky diode on a potentialfree cooler with cover against direct contact and top-hat rail clamb. Type: KGEK006S001M92 Art.-No.: 59610.2 limitin average on state current: 2 x 50 A block ...read more

Condenser extension module CEM 16

The CEM-module is used to increase the back-up energy of the C-TEC devices. Charging and discharging of the extension modules is controlled and monitored by the C-TEC respectively.read more

Condenser extension module CEM 8

The CEM-module is used to increase the back-up energy of the C-TEC. Charging and discharging of the extension modules is controlled and monitored by the C-TEC respectively.read more

Condenser extension module CEM 2

The CEM-module is used to increase the back-up energy of the C-TEC2403 devices in AC- and DC- . Charging and discharging of the extension modules is controlled and monitored by the C-TEC 2403 respectively. AC C-TEC 2403.read more

Condenser extension module CEM 2

The CEM-module is used to increase the back-up energy of the C-TEC2403 devices in AC- and DC- . Charging and discharging of the extension modules is controlled and monitored by the C-TEC 2403 respectively. AC C-TEC 2403.read more

Condenser hollow chage DC-USV-Equipment C-TEC 2440 P

The DC- buffer module of the series C-TEC works with ultra-capacitors as energy storage inside the housing. These capacitors are charge by a external regulated DC-power supply in normal operation. In case of an interruption of the DC-power supply the energy of the capacitors is released. The load ...read more

C-USV (MLTC 20 kVA)

Everyone knows the problem with the batteries in UPS systems. Due to the often very high temperatures inside the UPS system, the lifetime is often well below the specified 5 - 10 years. Especially in industrial maintenance-free systems are extremely important. The j.schneider Elektrotechnik GmbH has ...read more

AC-C-TEC 2420-8

The buffer module of the series AC-C-TEC works with ultra-capacitors as energy storage inside the housing. In case of an interruption of the DC-power supply the energy of the capacitors is released. The load is supplied by the buffer module till it is discharged. The back-up time depends on the state of ...read more

AC-C-TEC 2403-1

The buffer module of the series AC-C-TEC works with ultra-capacitors as energy storage inside the housing. In case of an interruption of the DC-power supply the energy of the capacitors is released. The load is supplied by the buffer module till it is discharged. The back-up time depends on the state of ...read more

C-TEC 2410-10

The DC- buffer module of the series C-TEC works with ultra-capacitors as energy storage inside the housing. These capacitors are charge by a external regulated DC-power supply in normal operation. In case of an interruption of the DC-power supply the energy of the capacitors is released. The load is supplied ...read more

C-TEC 2410-1

The DC- buffer module of the series C-TEC works with ultra-capacitors as energy storage inside the housing. These capacitors are charge by a external regulated DC-power supply in normal operation. In case of an interruption of the DC-power supply the energy of the capacitors is released. The load is supplied ...read more

C-TEC 2408-20

The DC- buffer module of the series C-TEC works with ultra-capacitors as energy storage inside the housing. These capacitors are charge by a external regulated DC-power supply in normal operation. In case of an interruption of the DC-power supply the energy of the capacitors is released. The load is supplied ...read more

C-TEC 2405-5

The DC- buffer module of the series C-TEC works with ultra-capacitors as energy storage inside the housing. These capacitors are charge by a external regulated DC-power supply in normal operation. In case of an interruption of the DC-power supply the energy of the capacitors is released. The load is supplied ...read more

C-TEC 2403-1

The DC- buffer module of the series C-TEC works with ultra-capacitors as energy storage inside the housing. These capacitors are charge by a external regulated DC-power supply in normal operation. In case of an interruption of the DC-power supply the energy of the capacitors is released. The load is supplied ...read more

UGV (uninterrupted power supply co-current flow feed-in) AkkuTEC 4801

As of now another device of the AKKUTEC series from J. Schneider Elektrotechnik GmbH is available: The AKKUTEC 4801 C is a small DC-UPS in wall housing. AKKUTEC stands for the robustness of the DC-UPS units who operate in parallel stand-by principle. They ensure the back-up of the DC power supply in ...read more

DC UPS in cabinet for wall mounting certification according VDS

For the use in fire alarm systems, automatic openable vents for smoke and heat, speech alarm systems. - All cabinet versions with 3 A output voltage are equipped with fuse boards with 5 fuses. - All cabinet versions above 3 A output voltage are equipped with fuse boards with 10 fuses. - All cabinet ...read more

DC UPS in wall housing

The J. Schneider Elektrotechnik GmbH has launched a new range of DC UPS systems in wall housing to the market. The devices are available in voltages of 12V (current levels: 3, 5 and 10A), 24V (current levels: 3, 5, 12 and 20A) and 48V (current: 3, 5 and 10A). They are equipped with standard fuse boards ...read more

Fuel Cell UPS

Today there are many areas where we are dependent on a safe, uninterrupted power supply even in exceptional situations such as severe weather, natural disasters, widespread black-outs. In the area of security, communications, surveillance and so on it is increasingly important to use "mains-independent ...read more

DC UPS AKKUTEC with 48 V output

J. Schneider Elektrotechnik GmbH has added three models with 48 V output to the DC UPS series AKKUTEC. The uninterruptible power supplies with 230 V AC input supply 48 V DC at the output , 1 A, 3 A or 10 A output current, depending on the model. Since the construction equipment is operated without a ...read more

Effimorph, the transformers for the future are available

As one of the first transformer manufacturers in Germany the J. Schneider Elektrotechnik GmbH is able to offer a transformer generation with lowest standby losses. The transformers which are named Effimorph can be build and delivered as distribution transformer, as well as power converter or feed-in ...read more

High voltage power supply

The switch mode power supplies of the VAPTEC series are specially designed for electron-beam evapo-ration processes. This series includes the actual high voltage power supply NHRR which provides an out-put voltage of 8 - 10kV at an output power of 3, 5, 10kW as well as the necessary cathode-heat trans-former ...read more

C-TEC 2420-08 buffer modul

The DC-Buffer unit from our series "C-TEC mounted with Ultracapacitors as energy storage. These capacitors will be charged under normal conditions from an external regulated DC-Power supply. If the DC-supply is interrupted there will be regulated energy released, delivered from Ultracapacitors. The ...read more

buffer power supply AC CTEC 2420-8

The DC buffer power supply in the AC C-TEC range uses ultra capacitors as energy storage. These Capacitor will be charged in normal operation through AC-Net The connected DC-load will be provided from the AC-Net as well. In case of interruption of the dc supply the energy of the capacitors is released. ...read more

UPS for mount in cabinet

The uninterruptible power supply of the proTECTO q series, is an online UPS System, designed in latest Technologie. Because of ist mounting angles it is especially suitbable to be built in a switchmode cabinet.read more

IPC-UPS

The DC-UPS.System AkkuTEC is a powersupply for IPC. The UPS have a interface and you can make a shutdown of your system.read more

AC Voltage UPS

uninterruptible power supplies Modern UPS-systems in online technology with permanent and double conversion supply the consumers independ from the mains and reliable with sinussoidal voltage. The input voltage is filtert about 100 percent, the output voltage is constant, the supply of the consumers is ...read more

UPS Online

Uninterruptible power supplies: Modern UPS-systems in online technology with permanent and double conversion supply the consumers independly from the mains and reliable with sinussoidal voltage. The input voltage is filtert about 100 percent, the output voltage is constant, the supply of the consumers ...read more

Battery charger

Uninterruptable DC-power supplies (DC-UPS-systems) ensure the continous operation of machinery or a controlled process-stop in case of power supply problems. Schneider offers a wide range of products of DC-UPS-systems from 2A to 900A and bigger, the software and comprehensive service achievements. Remarkable ...read more

Charging and control unit for Ultracapacitor buffer modules

The UCC TEC (Ultra Capacitor Charger) is a charging and control unit for Ultracapacitors modules The UCC-TEC respectively the UC modules are available customerspecified in the range of 24 - 400 V DC. The are used for the maintenance-free, uninterrupted supply of DC power loads such as drives. It has ...read more

Capacitor-buffered module

The DC-buffer module of C-TEC series uses ultra-capacitors inside the housing for energy storage. These capacitors are charged by an external, regulated DC power supply during normal operation. During an interruption of the DC supply, the energy of the ultra-capacitors is released. The load is supplied ...read more

DC-UPS

The battery backed up DC UPS AkkuTEC 2440 uses the standby-parallel principle of operation and, in conjunction with a lead accumulator, ensures that the DC power supply is reliably maintained in the case of a mains power failure. The power supply has the following features: · Switched primary, switched ...read more

DC UPS-Systems

The battery backed up DC power supply in the AKKUTEC range uses the standby-parallel principle of operation and, in conjunction with a lead accumulator, ensures that the DC power supply is reliably maintained in the case of a mains power failure. The power supply has the following features: · battery ...read more

Fuel Cell UPS

The fuel cell UPS of the series SF works independent from the mains. The system changes methanol from a tank into electrical energy. The supply is realized with a small accumulator. If the accumulator drops under the limiting voltage of 21,6 V the fuel cell switches on, the load is now supplied by the ...read more

Power supplies

Our delivery range includes power supplies with or without battery back-up, un-regulated or primary switched. As a competent manufacturer of high-voltage DC power supplies we deliver solutions for a wide range of customer applications. The name Schneider has become synonymous with products which are ...read more

Safety and Separation Transformers

Safety transformers Separation Transformers are also part of the production range of the J. Schneider Elektrotechnik GmbHread more

Special transformers

Experienced technicians and engineers develop, calculate and manufacture the coiled and wound products. The requirements which these products must meet are defined in close cooperation with the customer. A thorough knowledge of the applications forms the basis for finding the best solutions for the power ...read more

Chokes

We deliver customer specified types regarding cooling systems, protection systems and required regulations smoothing chokes 1- or 3-phase commutation chokes filter-circuit chokes compensation chokes current limitation chokes without FE-core special chokes softstart chokesread more

Transformers

air and liquid-insulated coiled and winding products with natural or forced cooling.read more

Battery-buffered Power Supplies

Uninterruptable DC-power supplies (DC-UPS-systems) ensure the continous operation of machinery or a controlled process-stop in case of power supply problems. Schneider offers a wide range of products of DC-UPS-systems from 2A to 900A and bigger, the software and comprehensive service achievements. Remarkable ...read more

AC-UPS systems power range 600VA - 800kVA

uninterruptible power supplies Modern UPS-systems in online technology with permanent and double conversion supply the consumers independ from the mains and reliable with sinussoidal voltage. The input voltage is filtert about 100 percent, the output voltage is constant, the supply of the consumers ...read more

AC UPS

Everybody knows the Problem of lead accumulators in UPS systems. Because of high temperatures inside the UPS System the life duration lies significantly below the 5-10 years which are specified from the manufacturer. Especially in the industrial branch maintenancefree systems are extremely important. ...read more

DC UPS-Systems

The battery backed up DC power supply in the AKKUTEC range uses the standby-parallel principle of operation and, in conjunction with a lead accumulator, ensures that the DC power supply is reliably maintained in the case of a mains power failure. The power supply has the following features: · battery ...read more

Stored items

0

Server communication error: Item could not be saved.