Advertisement
HANNOVER MESSE 2018, 23 - 27 April
Homepage>Exhibitors & Products >Detuned Capacitor Bank

Detuned Capacitor Bank

Ergun Elektrik

Exhibitor details
Logo Detuned Capacitor Bank

Exhibition stand
Topic: Turkish Pavilion

Contact(s)
Ms. Economist Sinem Ergun
Send E-mail
Mobile: +90 532 5812271
Fax: +90 232 4627204

Product description

The traditional method of reactive energy compensation is to directly connect the capacitor banks to the main network.
However, it is not suitable to connect the capacitor banks to the network without a reactor because of the reasons below:
-If there are harmonic currents produced by non-linear load in a facility.
-The capacitor banks enter into resonance with inductive loads and for that reason, breakers run into nuisance tripping.
-Premature failure of the capacitor banks.
THE BENEFITS OF USING DE-TUNED CAPACITOR BANKS
-Eliminates the possibility of resonance
-Prevents increase in harmonic currents
-Prevents the breakdown of the capacitors and contactors; reduces maintanence costs and eliminates the risk of paying reactive fee due to the capacitor banks capacitance value loss
-Extends the lifetime of the capacitor banks
-Prevents unwanted production stop caused by unnecessary nuisance tripping of the main circuit breakers of the
distribution network

ELECTRICAL DESIGN
-All cabling is engineered with flexible NYAF cables and is conformable with fuse ampere value
-Energy could be extracted from the main bar without fenestration

CONSTRUCTION
-Modular system
-The body and interior installation carriers assembled with perforated profile cap screws. Universal and serial layout potentiality with square hole system
-2 mm sheet iron, RAL 7032 powder paint
-2mm sheet iron, galvanized after engraving the interior installation carriers
-Panels with one lid in front, side and back lids with perforated sheet iron for ventilation
-The copper bar is placed at the top of the panel, which is equipped with NH-fuse switch disconnector, contactor, reactor and capacitor in descending order. Capacitors are placed at the bottom of the panel, which has the lowest temperature

Product website

All products offered by this exhibitor

Shunt Reactor

Shunt Reactors are used in the systems where inductive load is needed, such as to eliminate the capacitive load of the cables and to prevent paying reactive energy cost and in test setups where inductive currents are needed to test the products.read more

M.V. Capacitor Bank

Our company manufactures medium voltage capacitor banks to compensate the reactive power of medium voltage motors and transformers. They are pressure switch protected and are designed with a two-star imbalance protection system. Our capacitor banks could be designed as either automatic or fixed.read more

Generator Neutral Grounding Resistors

Limiting fault currents becomes very important at protecting generator windings. For that reason we are manufacturing generator neutral grounding resistor panels limiting fault current to 10 Ampere value. By limiting fault current damage at the fault point is also reduced; therefore, maintenance and ...read more

De-tuned Capacitor Bank Module

Our company build de-tuned capacitor bank modules in order to increase the production of low voltage de-tuned capacitor banks. The capacitor bank module has a fuse, contactor, reactor and a capacitor cabled for each step. There is no need for bar installation because the module consists of NH-Fuse Switch ...read more

Neutral Grounding Resistor

NEUTRAL GROUNDING RESISTORread more

Smooting Reactor

Smoothing reactors are used on the DC side of the converter set for obtaining smooth DC voltage. Our company produces smoothing reactors in accordance with desired current value. SMOOTHING REACTORS TECHNICAL DATA Standarts: EN61558-2-20 , EN60289 Rated Voltage: 230V...400V...600V...1000V Rated Current: ...read more

M.V. Capacitor Bank

We manufacture MV capacitor banks for the MV systems where high reactive power need is present.read more

Breaking Resistor

When a motor is driven by a mechanical load in the case of cranes or lifts, it acts as a generator, which converts kinetic energy into electrical energy. If there is no a regenerative system, it creates unwanted and harmful energy for the electrical motor drive system. Braking resistor, which can be ...read more

Harmonic Filter Reactor

HARMONIC FILTER REACTORread more

Current Limiting Reactor

During the switch of a acapacitor bank ,the switching transient current is very high.The current can even be very close to the short circuit current level.By mounting a current limiting reactor to the system the switching transient current can be reduced to a much more safer level.As a result circuit ...read more

MV Harmonic Filter Reactor

Power Transmission and distribution systems are designed for operation with sinusoidal voltage and current waveforms at a constant frequency. However, when non-linear loads - such as thyristor drives, converters and arc furnaces - are connected to the system, excessive harmonic currents are generated, ...read more

Transformer

We manufacture one phase , three phase and dry type transformators for different applications.read more

Line-Load Reactors

Line/load reactors help to keep your equipment to run longer by absorbing many of the disturbances especially the spikes coming from the electrical system which otherwise damage or shut down your inverters,variable speed controllers or other sensitive equipments.They are the modern technological solution ...read more

Detuned Capacitor Banks Thyristor Switch

Our company produces de-tuned capacitor banks with thyristor switches for factories and facilities, which use lifts, elevators, arc furnaces, welding machines, etc.. This type of panel differs from the de-tuned capacitor bank panel because of the fact that the switching is done with thyristor switches ...read more

Detuned Capacitor Bank

The traditional method of reactive energy compensation is to directly connect the capacitor banks to the main network. However, it is not suitable to connect the capacitor banks to the network without a reactor because of the reasons below: -If there are harmonic currents produced by non-linear load ...read more

Current Limiting Reactor

During the switch of a capacitor bank, the switching transient current is very high. Such that the switching transient current can even be very close to short circuit current level. By mounting a current limiting reactor to the system, the switching transient current can be reduced to a much more safer ...read more

Stored items

0

Server communication error: Item could not be saved.