HANNOVER MESSE 2018, 23 - 27 April
Hydac International
Product description:The electronic GW clogging indicator was developed specifically for use in low-pressure and lubricating systems. It measures the inlet pressure and the differential pressure by means of two sensors. This means that apart from the analogue output for the differential pressure, an additional analogue output is provided for the pressure upstream of the filter element. Particular customer benefit: Two sensor signals are integrated in one device. The GW indi-cator is available for pressure stages of 2, 3 and5 bar. The permissible operating pressure was limited to 25 bar for the sake of the indication accuracy.As with the electronic GC indicator, this indicator also issues an early warning signal at 75% of the "final value". For the first time, it is now possible to optimise this early warning signal to customer's needs.Another novelty is that the indication range of the analogue differential pressure signal was selectedsufficiently large in order to be able to monitor the function of the bypass valve (see Fig. 1).In this way, it is possible to visualise dangerous operational states (tool for Filter Condition Monitoring). This is recommended by, among others, the wind energy standard AGMA 6006.
On-site phone: +49 511 89405490 On-site fax: +49 511 89405480
Smart accumulator thanks to p0 guard Detection of deviating accumulator pre-charge pressure (p0) by means of pressure monitoring on fluid side Stand-alone data ... more
Variable-speed drives Dimensioning and configuring of electro-cylinders and DVA kits In download zone: Data sheet of the configured product CAD data Preliminary ... more
Smart Filter industry with HPT 500 IO-Li Filters with sensors for recording the differential pressure Bidirectional communication via IO-Link provision of measured ... more
Bluetooth pressure transmitter Wireless pressure transmitter, mainly for service and commissioning Standard Bluetooth interface Sensor operation and provision,visualisation ... more
Bladder accumulators are hydropneumatic accumulators fitted with flexible elastomer bladders that act as a separator between gas cushion and hydraulic fluid. They ... more
HYDAC has developed a new product, the Bladder Integrity System, or BIS for short. It consists of: - BIS bladder - BIS adapter - Electronic component BIS 1000 The ... more
HYDAC accumulators can be found in the majority of hydraulic applications worldwide and as well in high-pressure areas (offshore applications) where pressures exceeding ... more
HYDAC has been supplying reduced weight bladder accumulators to the aviation industry for over 30 years. With the aim of making weight reductions to meet market ... more
Full-PTFE diaphragm for standard accumulators HYDAC has developed a full-PTFE diaphragm and has patented its design and application. It is resistant to aggressive ... more
Alongside bladder, piston and diaphragm accumulators, HYDAC has added metal bellow accumulators to its product portfolio. HYDAC is thus giving the worldwide hydraulic ... more
HYDAC Piston Accumulator Series SK280 benefit from a special manufacturing process. The patented end cap arrangement of these accumulators allows the end cap wall ... more
Product description: The STENO oil mist separator is an important component of lubricating oil systems in turbines, such as gas, steam and hydro turbines. They ... more
Product description: In this application a connector housing is plugged to a differential pressure sensor. The housing contains a Reed switch, a temperature sensor, ... more
Product description: After strong development activities in the field of tank optimisation regarding degassing , HYDAC succeeded in developing a new in-to-out filter ... more
Product description: Based on our long-term experiences within Pulp & Paper industry the new HYDAC filter elements of the Optimicron® Pulp & Paper product range ... more
Product description: A solution with focus on functional integration is also the new breather filter development from HYDAC, the BF6 DRY with return valves. The ... more
Product description: The partial flow which has to be cooled is lead over separate connections and passes the thermo bypass valve. During cold start the lobe of ... more
Product description: The flange-mounted low pressure filter, MFX 80, was developed as interface-optimised alternative to the common inline version of the MFX. It ... more
Product description: The installation of valve blocks in mobile working machines is quite common. Their sensitive components have to be protected by an upstream ... more
Product description: The special feature of the low pressure filter, LPFP 160, is the flange-connection directly to the feed pump. The filter is characterised by ... more
Product description: The development was focused on an improved serviceability, safe assembly and disassembly as well as a special high service life of the filter. ... more
Whenever a larger number of cables and / or hoses have to be laid, eg in machine tools or control cabinets, the question arises of simple assembly and an ordered ... more
Up to now, installing and maintaining power cables has been a costly and time-consuming procedure. With the development of the HY-ROFLEX HYDAC shows how it should ... more
Mounting large-volume components with different shapes (round and/or angular), e.g. air reservoirs, plastic containers, steel and plastic tanks or accumulators ... more
CX valves (coaxial valves) in modular design are a new product at Hydac Accessories for controlling vacuum, gaseous, liquid, abrasive, soiled and aggressive media ... more
Pipe connection at both ends Alternatively, the upper one can be made as a vent port External mounting can be at larger distances following the principle of communicating ... more
Fluid level gauges from HYDAC Accessories are designed for simple monitoring and and visualization of the values relating to tank fluid level. The numerous design ... more
Fluid level gauge in stainless steel with display window made of unbreakable flat glass for use on tanks in harsh environments, such as the marine and offshore industry ... more
This 2-way high pressure ball valve made of stainless steel has been designed for use in 4,000 m water depth for operating pressures up to 20,000 psi. Here it ... more
Delivery according all international standards In house engineering and customization Covers nearly all process applications Delivered as complete package including ... more
As a result of the increasing demand for IO-Link products, HYDAC Electronic have extended their IO-Link product portfolio. The well-known HYDAC 3000 sensor series ... more
Neuer HYDAC Wegsensor HLT 700 Das Sensor-Programm der HYDAC ELECTRONIC wurde in den vergangenen Jahren systematisch erweitert. Mit dem Produkt HLT 700 bringt HYDAC ... more
For 30 years HYDAC offer hand-held measuring units for measuring tasks in relation to stationary and mobile machines. With the new HMG 4000 the next step in evolution ... more
As they are so simple to integrate and need no maintenance, HYDAC's HEZ electric cylinders make the implementation of linear movements really easy. In an HEZ unit, ... more
Variable speed drives are characterized by a perfect symbiosis between hydraulics and electro mechanics. The pre-configured system comprises a standard or servo ... more
The HYDAC Betterfit range for gas filter elements covers replacement filter elements in the dimensions used by well-known market participants. Put your money on ... more
In process technology, the automatic back-flushing filter AutoFilt® RF3 series, has been highly successful. They are convincing with their flow-optimised design. ... more
Hydraulic training for all areas with rugged industrial components HYDAC offers the Hydraulic Trainer HHT2 for education and training purposes. It consists of components ... more
Compensating couplings are the focal point of our range. As positive-locking transmission elements, they compensate radial, axial or angular misalignment between ... more
Bell housings are connection elements between drive motors and hydraulic pumps. Both connecting flanges are supplied ready for installation. The bell housings are ... more
In the HYDAC tradition, we don`t just offer standardised and individually designed high-tech products. As a system specialist, drawing on the expertise of HYDAC ... more
Thanks to their robust design, the high-pressure valves CXH are particularly suitable for liquid, highly viscous, contaminated and gaseous media. They are used, ... more
The previous technology provided pressure compensation only on the inlet side. With back pressure (on A-side) up to 3 drive pistons were required in series to keep ... more
Force pilot operated valves are closed in the standard design always current. In case of failure of power supply, the valves close automatically. This actuation ... more
Coaxial valves from HYDAC Accessories have been used for years successful where it comes to high requirements. Their durable design enables especially applications ... more
The wide product range of HYDAC Accessories enables optimization of corresponding components. Because of their robust design, the CX-valves are used not only to ... more
Pressure-compensated, pilot operated 2/2- & 3/2-way Coaxial Valves at NC-design used for controlling gaseous, liquid, gelatinous, highly viscous, pasty, contaminated ... more
Pressure-compensated, direct acting 2/2-& 3/2-way coaxial valve; used for controlling vacuum, gaseous, liquid, gelatinous, abrasive, contaminated and aggressive ... more
By using the FSK, the fluid level is monitored via an electrical switching signal. This switching signal can be used as an alarm or to adjust the fluid level. The ... more
FSA nominal sizes from 76 mm to 1000 mm FSA-TT low temperature range to -46 °C FSA-IB leak-free shut-off of the medium against to the FSA by check valve approved ... more
The check valve is a type of shut-off valve. In the intended flow direction (A to B) the medium can pass freely through the valve, but in the reverse direction flow ... more
The modular extensible ball valve for flap control enables control of 6 operations with one supply line. Product advantages - Modular design - The ball position ... more
The ball valve is used to shut off media flows, and is used wherever the ball valve needs to be actuated manually even at high pressures. Optionally, the ball valve ... more
Modular adjustable ball valves for applications that demand special process requirements. We recommend using an adapter plate when fitting to block-type, sleeve-type ... more
The ball valves are used to shut off media flows, and are used wherever the ball valves need to be actuated manually even at high pressures. Since ball valves stainless ... more
The 3-piece high pressure ball valve with a swing-out centre section was designed for a working pressure of up to 6000 psi in continuous operation.It is installed ... more
The ball valve made of aluminum has been specially developed for use as a drain valve for hydraulic tanks. It is directly welded to the tank, using the weld-on ring. ... more
Constructed of high strength, corrosion-resistant stainless steel the three-piece 2-way high pressure ball valve is used primarily in systems for chemical injection ... more
Up to now, installing and maintaining power cables has been a costly and time-consuming procedure. With the development of the HYDAC shows how it should be done. ... more
The HY-ROS pipe clamp is suitable for clamping pipes, hoses and electric cables. HY-ROS clamps make installation clean and simple. Product advantages - Recommended ... more
Based on the DIN 3015 series with the HY-ROS Corrosion Protection Clamp an effective, simple and cost-effective system against crevice corrosion, which occurs preferentially ... more
As further development of HRGKSM, HY-ROS Quick release swivel bolt band clamps HRVMS and HRVMW are specifically designed for high dynamic loads, thermal stresses, ... more
Buegu clamps keep pipes, hoses, cables, etc. safely and securely in place. They are executed as single or double clamp (different diameters are possible) and are ... more
Emissions directives are raising the standards for diesel fuels. As a consequence, suppliers must guarantee that there is less contamination and lower water content ... more
The LowViscosity Housing Filters LVH-F are used to separate particle contaminate from diesel fuel. Thanks to the design, these are perfectly suited to removing large ... more
In many industrial applications, technical cleanliness testing in accordance with ISO 16232 and VDA 19 standards is essential. Ever increasing demands are made on ... more
The Wombat filter housing WBF is used in particular for pre- and main filtration of fluids. It provides excellent protection for components and systems primarily ... more
The Wombat element is a star-shaped filter element which receives flow from the inside to the outside and which is designed to hold large amounts of dirt at high ... more
The VarnishMitigation Units VMU are designed to condition mineral oils and are easy to use. They are particularly effective at removing oil ageing products (so-called ... more
The Trimicron series of filter elements have been specially developed for the combined removal of fine particles, water and oil ageing products from hydraulic and ... more
The SensorMonitoring Unit SMU 1200 is a display unit for HYDAC fluid sensors and is designed to display and store measured data. The SMU is optionally equipped with ... more
The OXiStop is a tank solution with integrated, hydraulically driven degassing and dewatering unit. An integrated membrane prevents direct contact with the ambient ... more
The OffLine Filter Pressure OLFP is a stationary offline filter and is used to remove oil ageing products, water and solid particles from hydraulic and lubrication ... more
The OLFCM 15-60 OffLine Filter is a robust filter unit for fixed installation in a bypass flow of hydraulic oil systems, with larger oil volumes. The integrated ... more
The OffLine Filter OLFBD is a small, stationary filter unit, without a motor pump assembly, for the fine filtration of hydraulic and lubricating fluids, and removing ... more
The OLF 5 series filters are used for the fine filtration of hydraulic and lubricating oils offline. The series encompasses numerous versions, for example with or ... more
The filtration unit OFX serves as a portable service unit for filling preloaded systems, such as the supply circuits of hydrostatic transmission drives and work ... more
The filtration unit OFCM 7 with ContaminationSensor CS 1000 is a portable service unit for filling hydraulic systems, rinsing smaller hydraulic systems and offline ... more
The mobile OFCM 5 filtration unit is designed to fill / drain hydraulic systems and to filter offline hydraulic and lubricating oils. The integrated CS 1000 ContaminationSensor ... more
The MetallicContamination Sensor MCS 1000 is used for recording metallic solid particle contamination in hydraulic and lubrication fluids. The particles are determined ... more
The FluidMonitoring Module FMM series combines HYDAC's ContaminationSensor CS 1000 and AquaSensor AS 1000 condition monitoring products in one system. It provides ... more
The candle filter elements of the series Flexmicron are used to separate out solid particles in the most different applications. They are characterized by enormous ... more
Monitoring operating fluids is essential to ensuring the efficient operation of hydraulic and lubrication oil systems. The CSM Economy ContaminationSensor Module ... more
The FluidControl Unit FCU 1000 series is a portable fluid service unit for short-term measurement of solid particle contamination in hydraulic systems. The integral ... more
The FluidAqua Mobil FAM 5 serves to dewater, degas and filter hydraulic and lubricating fluids. It works on the principle of vacuum dewatering to extract free and ... more
The AquaSensor AS 3000 is a fluid sensor for the online detection of water in oils, particularly as a sensor for condition monitoring (Condition Monitoring). It ... more
The new Optimicron® filter elements by HYDAC were optimised in terms of filtration efficiency and energy efficiency: They offer the best combination of filtration ... more
The application specific filter elements of the Optimicron® Pulse product range are characterized by a special flow fatigue resistance in applications, exposed to ... more
The trend of using ash-free hydraulic fluids, providing more compact systems and applying finer filtration, has led to an increase of electrostatic charging problems ... more
The filter line AFLD was developed for the use in lubrication applications, which underlie the API (American Petroleum Institute) guidelines. The filters are available ... more
The application-specific filter elements, Optimicron® Power, convince with increased resistance, safety and an especially low pressure drop. They are characterized ... more
The new controller series of HY-TTC 500 is based on a 32 Bit platform with a modern µ-Controller platform. The controller is characterised by its high performance ... more
The HIT 1000 Inclination Sensor is capable of precise, fast and long term stable detection of inclination angles for mobile machinery in 2 axes. This is for example ... more
The new HY-TTC 30X series of I/O expansion modules provides an outstanding power balance combined with extremely compact design. The HY-TTC 30X series expansion ... more
The HYDACLAB® 1400 is a further development of the renowned HYDACLAB® series. This version has been enhanced with some interesting new features which include the ... more
In recent years, HYDAC ELECTRONIC have been systematically developing their sensor portfolio for mobile work machines. The focus of attention here has been on the ... more
The HYDAC Process line filter series - PLF1 is suitable for the continuous separation of solids from low-viscosity fluids, e.g. water of all types and origins, as ... more
Compact automatic filter for cooling lubricants in self-supplied machine tools - the efficient and at the same time safe alternative to cyclone separators. Whereas ... more
The new, patented technology used in the HYDAC AutoFilt® RF10 breaks new ground and provides a solution for applications where conventional back-flushing filters ... more
This filter unites HYDAC's expertise and innovative strength by means of an interdisciplinary combination of solid filter technology and tried-and-tested piston ... more
With this unique combination of the separation performance of a hydrocyclone and the filtration rating of an inline filter, we offer the customer greater process ... more
Stored items
0