HANNOVER MESSE 2018,
23 - 27 April
The increasing power density of the industrial production results in a higher risk of interference currents along the cables, on the conducting paths of the power supply and those of the potential equalization systems. The diagnostic tool EMC-INspektor® V2 allows an automated, contactless and uninterrupted test and detects electromagnetic disturbances temporarily. Up to four current transformers can be connected to the device. The measurement values are recorded separately, evaluated and compared.EMC disturbances are measured along the fieldbus cable via the 24 VDC power supply, via the 230/400 VAC low-voltage distribution system, in the equipotential bonding system and via the transmitter lines.
Plug in, measure, result, without having to struggle through numerous complex tables and diagrams. Anyone who has performed a quality analysis in an industrial ...
The Indu-Sol PROFINET Switch PROmesh P9 is the first full PROFINET switch that is equipped for the increased performance requirements in the PROFINET and conforms ...
The software PROscan® Active works hand in hand with the PROFInet INspektor®. The topology software provides a current 360 degree view of your system at any time ...
It is integrated in the respective network on a permanent basis and monitors permanantly the logical data traffic during operation. In this way, the system operator ...
The PROFINET-INspektor® NT is permanently integrated in the network and monitors permanently the logical telegram traffic during operation. The operator is acquainted ...