Advertisement
HANNOVER MESSE 2018, 23 - 27 April

Filter units

Logo Filter units

Exhibition stand
Topic: Surface World - ZVO

Product description

The combination of the filter chambers and the pumps created a big series most different filter units. The cover the range from 500 - 30.000 l/h. They are almost all equipped with a pressure gauge, air release valve, splash guard on the lid, a hand priming pump and an drain tap.

The most noticeable development in the youngest time are our alluvial filter units. Quality requirements showed that the filter capacity is a decisive factor. This knowledge leaded to bigger capacity as well as a better filtration quality. Nowadays an agitation of 10 times the continence of the tank per hour are no exception. In modern plating plants for high class surfaces as we know them in the PCB production and the plating on plastic this is already state of the art. The rules of protection of our envirorunent hardly allows the use of cartridges and papers any longer.

Our alluvial filter units are a systematic solution which respects these rules. In tead of bigger units we install one unit per position. In this way each cell is filtered separately. The complicated lay out of the pipes to realize a symmetrical flow and agitation of the bath are not necessary any more. For the filter we choose plastic alluvial elements. The are covered with filter aid and are cleaned with only a few gallons water without being removed. With the right filter aid it's easy possible to filter < 1 mm. But for water and filter aids there is no waste of expendable material.

Our concept provides that several filter units (10.000, 20.000 or 30.000 1/h) and a slurry tank are installed on stainless U-section. Its a tum key plant. That means, that all the pipes and valves are completely installed. Only the connections to the bath have to be made.

Product website

All products offered by this exhibitor

Metallosorb-Kombi

Precious metal recovery system based on resins.read more

Monitoring

This new by Bohncke developed electronically filter control relay with integrated dry run protection and overload relay is connected in the current supply cable. In bigger plants it also can be placed in the switchboard on a C-rail. lt analyses the Phase angle between motor current and tension which ...read more

Magnetic coupled Pumps

A completely closed pump housing is specific for this pump. The power is transferred by a magnet on the shaft of drive motor to an other magnet inside of the closed pump housing. This magnet is connected to the impeller. Magnet and impeller who form a unit are beard on a ceramic shaft. They are made ...read more

Filter units

The combination of the filter chambers and the pumps created a big series most different filter units. The cover the range from 500 - 30.000 l/h. They are almost all equipped with a pressure gauge, air release valve, splash guard on the lid, a hand priming pump and an drain tap. The most noticeable ...read more

Immersion pumps

In this type of centrifugal pump, the pumphousing is separated from the motor by support pillars. The impellor is driven by an extended shaft. The pump is mounted in that way, that while the pump housing is immersed in the liquid, the motor is situated above. In this design the shaft seal or bearing, ...read more

Stored items

0

Server communication error: Item could not be saved.