The compact, low-cost MAXIMATOR High-pressure Pumps are driven by air or noble gas pressures between 1 bar and 10 bar and generate pressure up to 7.000 bar. There are numerous potential applications for MAXIMATOR Pumps in machine engineering, oil and gas industries, chemical and pharmaceutical industries, defence, mining and the construction industry as well as in aviation and aeronautics.
MAXIMATOR Pumps are available in 6 sizes: M, S, G, GX, GPD and DPD. The sizes vary according to their suitability for different pumping media, wide ranging flow rates and their maximum allowable operating pressures. MAXIMATOR provides the best-suited fluid pump for each application.
MAXIMATOR high efficiency pumps are ideal for a broad variety of oil, water and chemical applications. MAXIMATOR pumps are air driven at a drive air pressure of 1 to 10 bar (14,5 to 145 psi). Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.
MAXIMATOR pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determing maximum outlet pressure. Higher pressures are obtained by using higher pressure ratios. MAXIMATOR model numbers reflect the pumps' nominal pressure ratios, while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.