HANNOVER MESSE 2018, 23 - 27 April
HAWE Hydraulik
Axial piston motors are constant motors. They have a constant displacement and therefore generate a fixed speed dependent on the volumetric flow.
Hydraulikaggregate zeichnen sich durch einen sehr flexiblen Aufbau und eine kundenspezifische Anpassung aus dem Baukasten aus. more
Valve controls control and regulate complex mobile or stationary hydraulic systems. more
Check valves and pre-fill valves are a type of non-return valve. Check valves block the oil flow in one direction and open in the other direction. Pre-fill valves ... more
Check valves with hydraulic release are a type of check valve. They block one or both hydraulic consumer lines or are used as a hydraulically actuated drain or circulation valve. more
Check valves are a type of non-return valve. They block the oil flow in one direction and open in the opposite direction. In the closed state they have zero leakage. more
Flow valves influence the volumetric flow in hydraulic systems. The range includes flow control valves, flow dividers, restrictors and throttle valves. more
Pressure reducing valves are a type of pressure control valve. They maintain a largely constant outlet pressure even at a higher and changing inlet pressure. more
Pressure-limiting valves are a type of pressure control valve. They safeguard the system against excessive system pressure or limit the operation pressure. Pre-load ... more
Load-holding valves are a type of pressure control valve. They prevent loads on cylinders or motors dropping in an uncontrolled manner. For this purpose they are ... more
Directional seated valves have zero leakage. Depending on the valve type, operation is electromagnetic, pressure-actuated, mechanical or manual. The range includes ... more
Throttling directional spool valves are a type of directional valve. They continuously and manually meter the volumetric flow in hydraulic systems with single and double-acting consumers. more
Proportional directional spool valves are a type of directional valve. They control the direction of movement and the velocity of individual or multiple hydraulic ... more
On/off directional spool valves are used to control the direction of movement of consumers such as hydraulic motors and hydraulic cylinders. more
Hand pumps are a type of hydraulic pump. They generate a flow rate manually. more
Air-driven hydraulic pumps are pneumatically driven, reciprocally acting plunger pumps. They operate as pneumatic pressure boosters with oscillating movement and automatic stroke reversal control. more
Axial piston pumps have several pistons that are arranged parallel to the drive shaft. They are available as either variable pumps or constant pumps. Variable displacement ... more
Radial piston pumps are a type of hydraulic pump. They consist of valve-controlled pump cylinders that are arranged radially. more
Compact hydraulic power packs are a type of hydraulic power pack. They are characterised by a highly compact design, since the motor shaft of the electric motor also acts as the pump shaft. more
Two directional seated valves type NBVP share one block. This reduces the installation space in the design of the control systems by up to 50%. The savings in ... more
The electronic proportional amplifier type EV2S-BT controls all standard proportional solenoids, including solenoids for directional valves, pressure valves or even ... more
HAWE Hydraulik SE, Munich, now offers proportional directional spool valve type PSV (F) with CAN-BUS interface in four sizes. The valve features integrated control ... more
Stored items
0
Get new technology first