HANNOVER MESSE 2018, 23 - 27 April
esd electronics
The ECX-DIO8 module is equipped with 8 digital I/Os, each available as input and output. The nominal I/O-voltage value is 24 V. Nominal output current is 0.5 A at 24 V. The ECX-DIO8 module provides industrial digital in-/outputs with two-wire connection in combination with service-friendly wiring of supply voltage.The power supply can be applied via the InRailBus connector (TBUS-connector) integrated in the mounting rail or separately via the clamp-connection. The 100BASE-TX EtherCAT interface is compatible to IEEE 802.3.Configuration is done by EtherCAT master (XML file).
(.PDF)
CompactPCI Serial Board with Altera® FPGA for 4x CAN FD via DSUB25 Wide Range of OS Support and Advanced CAN Diagnostic Customization on Request Drivers are available for several Operating Systems more
- CompactPCI Serial Board with Altera® FPGA for 2x CAN via DSUB9 Connectors - Wide Range of Operating System Support and Advanced CAN Diagnostic - Customization ... more
High-End PowerPC with QorlQ CPU - NXP® PowerPC QorIQ T1014, 1.2 GHz, 64-bit architecture, Double Precision Floating Point Unit, Ethernet, ECC-RAM - In combination ... more
Comprehensive CAN Interface Card - 2x CAN interfaces according to ISO 11898-2 - Bus mastering and local data management - PICMG® CPCI-S.0 standard supporting high ... more
esd electronics has expanded their 402er-series of CAN-Boards with two Mezzanine-Boards: An XMC- and a PMC-CAN-Interface with four CAN-FD-Ports. The XMC-CAN/402-4-FD ... more
Two High-Speed CAN Interfaces for USB - CAN interfaces according to ISO 11898-2 with electrical isolation - Powered by esd Advanced CAN Core (esdACC) implemented ... more
The CAN-USB/2 module is an intelligent CAN-interface with a ARM 7 microcontroller for the local management of CAN-data. The module supports the USB 2.0 High Speed ... more
The CAN-USB/Micro is a very small CAN-USB interface that fits into a DSUB9 enclosure. The ARM Cortex-M3 micro controller controls CAN data. The non isolated CAN ... more
Single Lane PCIe Board with Altera® FPGA - 1x or 2x CAN-FD interfaces according to ISO 11898-2 - CAN bit rates from 10 kbit/s up to 5 Mbit/s with the same CAN transceiver - ... more
Single Lane PCIe Board with Altera FPGA for up to 4x CAN -1x, 2x or 4x CAN interfaces according to ISO 11898-2 -Bus mastering and local data management by FPGA -PCIe® ... more
PCI Board with Altera FPGA for up to 4x CAN - 1x, 2x or 4x CAN interfaces according to ISO 11898-2 - Bus mastering and local data management by FPGA - ... more
The AMC-CAN4 features four CAN High-Speed interfaces according to ISO 11898-2. The CAN interfaces are electrically isolated against the controller potential and ... more
The AMC-ADIO24 is equipped with a Spartan FPGA that manages the I/O data exchange in cooperation with the PCIe bridge. FIFOs for input and output direction and DMA ... more
High-End PowerPC QorIQ CPU - VME master CPU A16/A24, D16/D8 (EO) and SGL arbiter - NXP(TM) PowerPC QorIQ T1022, 1.2 GHz, 64-bit architecture, Double Precision ... more
Control your CAN Bus from around the world! - CAN data access from all over the world - CAN message insertion into your CAN net from all over the world - Performance ... more
The EtherCAN/2 is a gateway to transmit data between CAN and Ethernet. The module is designed for hat-rail mounting in a control enclosure as a backward compatible replacement ... more
The CAN-EtherCAT module links any EtherCAT network to a CAN network. The gateway operates as an EtherCAT slave with a maximum of 8 Kbytes input or output data on ... more
The ECX-EC connects two EtherCAT segments. Therefore the EtherCAT slave bridge implements two seperate EtherCAT slave interfaces for integration into two EtherCAT ... more
Convert your PCI Express System into an EtherCAT Slave Device - Add EtherCAT Slave (ECS) functionality to your PC - The EtherCAT Slave Controller address space ... more
EtherCAT Slave by XMC Card - Add EtherCAT Slave (ECS) functionality to your XMC equipped base board EtherCAT Slave Functionality Featured via FPGA - With the Beckhoff ... more
The module CAN-PN can link any PROFINET-IO controller to a CAN network. The CAN-PN gateway itself operates as a PROFINET IO device with a maximum of 1440 bytes input ... more
Connection of CANopen Devices and Networks to PROFINET IO - PROFINET IO device (1440 bytes input and 1440 bytes output) CANopen manager CANopen Gateway Easily ... more
The module CAN-DP can link any Profibus- DP master to a CAN network. The DP/CAN gateway operates as a slave-I/O component with a total of maximum 300 bytes process data ... more
Connection of CANopen Devices and Networks to PROFIBUS-DP - PROFIBUS-DP slave acc. to IEC 61158 (240 bytes input and 240 bytes output) - CANopen Manager - Cycle ... more
esd in Hannover, Germany presents a new and innovative EtherCAT switch module. Triggered by a simple switching signal (LAN selector switch), the ECX-Master-Selector ... more
EtherCAT Master Stack for embedded (real time) OS, written in ANSI-C for high performance, small resource usage and scalability. Core components are operating system ... more
The EtherCAT Workbench is a comprehensive EtherCAT configuration and diagnostic tool to create network configuration files, initialize and monitor an EtherCAT network. The ... more
The EtherCAT® Slave Stack is a software stack for the easy development of embedded slave devices written in ANSI C. It's available as source code optimized for high ... more
EtherCAT® ready to use Package - Full Version of EtherCAT Workbench, the esd EtherCAT configuration, diagnostic and monitoring tool for Windows - Demo Version ... more
The new CAN-CBX series with In-Rail-Bus provides industry compatible CAN bus in-/output modules in combination with service-friendly "wiring" of CAN bus and supply ... more
Stored items
0