The new JUMO dTRANS T06 multifunction four-wire transmitter is suitable for challenging applications in plant engineering. The compact mounting rail case with a design width of 22.5 mm and coded plug-in terminals allows for quick control cabinet installation and safe replacement during calibration or maintenance work. The SIL option is a special feature.The device can be used both with RTD temperature probes and thermocouples as well as with resistance transmitters/potentiometers and voltage/current signals - and converts these input signals into an output signal of 0(2) to 10 V or 0(4) to 20 mA. The universal measurement input with 22-bit resolution ensures maximum measuring precision with the JUMO dTRANS T06. The reliable three-way isolation between input and output guarantees high signal stability even when measuring conditions are difficult. In safety relevant applications - which are often found in plant engineering, power plant technology, or the chemical industry - the dTRANS T06 with the SIL option according to IEC 61508 allows for the project planning of a reliable temperature measuring chain. This is designed for SIL 3 in terms of software and for SIL 2 in terms of hardware. JUMO SIL temperature sensors are optimally incorporated in the device concept so that the planning efforts are reduced for the SIL design. In case a laptop is not available, the device can be quickly and easily configured in a user-friendly manner via a monochrome LCD display on the front with four keys in four different languages. Another benefit for startup on-site is the configuration-related display of the sensor input and sensor output assignment as well as the relay and interface assignment on the display. The transducer can be configured even more quickly and easily via the micro-USB socket on the front using configuration software and a laptop. Additionally, customer-specific linearization adjustments are available.