HANNOVER MESSE 2018,
23 - 27 April
Tolerance compensation in the assembly of components can be optimized to 25 micrometres with the new, high-precision shim (Schichtblech) from Georg Martin GmbH that goes by the name of Laminum® HP1. The special feature of these stainless steel spacer shims is the combination of severable peelable foil layers, each with a thickness of 0.05 millimetres and a final high-precision film with a thickness of a mere 0.025 millimetre. This so-called joker foil serves as a kind of final step in the manual fine adjustment process, where tolerances in the 2.5 hundredths range have to be compensated.The new Laminum® HP1 combined solution is a time and cost-optimized alternative to a spacer shim laminated entirely with 0.025 millimetre foil layers, because the manufacturing costs are lower than with fully coated 0.025 millimetre shims. Laminum® HP1 also helps the user to achieve the desired objective more quickly because the thicker 0.05 mm films can be peeled off much faster.Another advantage is that the practical utilization of the Laminum® HP1 in the assembly of components is simplified because the 25µ film (unlike the adjacent 50µ films) has a small, slightly raised finger lift which allows you to recognize the joker foil immediately and pull it off manually with the peeling knife, similar to the lid of a yoghourt tub!
For use in automobile propeller shafts to protect the universal joint.
Low ductile punched part made of sheet steel.
Material - Cold-rolled slit strip DC04, 1.0388
For use in the propeller shafts of ships' drive units to protect and hold the internal ball bearings of the universal joint and fasten the shock absorber of the ...
For use in automobile propeller shafts to protect and hold the internal ball bearings of the universal joint and cover the propeller shaft.
Highly ductile punched ...
For use in automobile propeller shafts to protect and centre the universal joint at the flange.
Highly ductile punched parts made of steel sheet, pressed in and ...
For use in the homokinetic ball joint of an automobile propeller shaft.
Interior centering for automobiles is punched part made of 2.5 mm thick cementation steel.
Used in the extension arm of sheet-fed offset printing presses. Complex connection part consisting of a housing (punched part) and plastic flange pressed in airtight. ...
For use in automobiles with hybrid drives. To cover and protect electrical plug connections. Punched part made of highly ductile rustproof steel strip.
Area of ...
With M-Tech® - Martin Technology, etched and laser-cut products can be replaced with precision stamping metal foils with simple geometry.
As an economical alternative ...
Georg Martin GmbH presents its first non-metallic laminated shims named M-Tech®L Mylar®. They are particularly suitable for the use in lightweight structures as ...
Edge bonded shims or loose leaf shims M-Tech®P (Lamipac) compensate tolerances in a rapid and targeted manner.
The following benefits can be exploited when using ...
Solid shims M-Tech®S makes it possible to adjust the finest tolerance graduations.
A classic tolerance compensation product that we offer is a solid shim that we ...
M-Tech®L laminated, peelable Shims for the individual compensation of tolerances.
At Georg Martin GmbH, we manufacture shims from our M-Tech®L laminated spacer ...
Mechanical assemblies from stamped and sheet metal formed parts are beeing created to become precise functional elements. This is achieved by using additional processes ...
M-Tech® self-adhesive metal foils are proposed in form of blanks or stamping parts as per customer's specification. They are very versatile and can easily fulfill ...
M-Tech®F - Metal foil tapes, metal blanks and metal strips on coil
Ready to hand - in constant use!
- As a spacer sheet in tooling.
- For adjustments in engineering.