HANNOVER MESSE 2019,
01 - 05 April
22 kV lattice towersThese are steel lattice structures welded together from rolled equal angles, the surface of which is protected by coating or hot dip galvanizing. The series ranges from 12 kN to 80 kN in vertex traction and from 12 to 24 m in height. The towers are fitted with the design of brackets required by our clients.Lattice towers - 1x110 kV, 2x110 kV and 4x110 kVSteel lattice structures of rolled equal angles, either fully bolted together or partially so in combination with welded sections. The surface of these items is protected by hot galvanisation or a suitable alternative coating. This series is divided into subgroups of specific applications, i.e. support, tension, anchor, branch or underpass towers.Lattice towers 220 kVSteel lattice structures made from rolled equal angles usually bolted together, although a welded version is available. The surface of these items is protected by hot galvanisation or a suitable alternative coating. This series comprises support, tension, anchor and branch towers or portals.Lattice towers - 1x400 kV, 2x400 kV and 3x400 kVLattice structures fully bolted together from rolled equal angles. The surface of these items is protected by hot galvanisation or a suitable alternative coating. The range is divided up according to specific application - support, tension, anchor and branch towers.Towers for emergency outage (bypasses)EGE is producer of steel towers for emergency outage - bypasses. These steel structures are delivered on site in case of emergency for 110 - 400 kV. Bypasses are welded parts of rolled angles which can be easily bolted together. The surface of these items is protected by hot galvanisation or a suitable alternative coating.
TKFC - 3-Phase shunt reactors are used to compensate the reactive power. With the development of renewable electric power sources (above all offshore and land wind ...
ETR earthing transformers are used to create an artificial neutral in distribution electric networks.
Typical parameters of EGE ETR earthing transformers are networks ...
Earthing resistors serve connections between the neutral points of distribution network to grounds in networks operating with resistor-grounded neutral points. The ...
Resistors for increasing active components of fault current.
Secondary resistors are used In order to improve the reliability of ground-fault directional protection ...
Arc suppression coils are used to compensate for capacitive currents when ground faults occur on an electrical network. They are connected to the distribution network ...
The power series of EGE busducts can handle up to 25 kA for self-cooled IPBs and 50 kA for forced cooled IPBs as follows:
Isolated phase busducts (IPB) with air ...