HANNOVER MESSE 2018,
23 - 27 April
JVL Industri Elektronik
MAC motor®s are complete servo systems including a high-dynamic AC servo motor, hall-sensors, encoder, power supply, driver and positioning controller, as well as facilities for incorporating various control modules such as Bluetooth, WLAN, ZigBee, EtherCAT, EtherNet/IP, CANopen, DeviceNet, Profibus, Nano PLC, RS232/RS485/USB, Process Control, etc.
New Compact Motors
The MAC motors set completely new standards for the performance and size of servo controls. With a length of only 182 mm for a 1500 W motor with a torque of 4.78/14.3 Nm at 3000 rpm, these MAC motors match the sizes of traditional servo motors without built-in controllers with flange 130x130 mm. This has only been possible through the use of extremely compact motors and the development of electronics and mechanics that utilise the latest technologies and manufacturing methods.
So what about vibrations and temperature? As with the other integrated servo motors in the range (50 to 3000 W), both the motor and all electronic components have been specifically selected to withstand the rigorous demands required by industrial use.
Power Supply and Energy Savings
Powering these motors is easy since it only requires connection of the main voltage of 3 x 400 VAC through the M22 connectors. Control voltage for the encoder and microprocessor circuitry is 24 VDC: In an emergency-stop situation, where an approved relay has cut-off the main power, encoder position and other values are maintained by this control voltage.
In some applications, however, this is not needed and in those cases an optional internal 24 VDC supply can be used, requiring only an AC main connection.
Furthermore highly effective switching technology is used to ensure low heat generation resulting in appreciable energy savings.
One of the big advantages of using the integrated MAC motor®s is that you don't need to install a separate servo driver or controller in a control cabinet. This gives you many subsequent advantages.
Birkerød, Denmark - JVL Industri Elektronik A/S, one of the world’s leading producers in the field of integrated servo and stepper motors, proudly announces a completely new generation of the NEMA23 integrated stepper motors that have proved their value for many years. The new motor family, ServoStep, uses the newest technology and the advancement of the previous designs, incorporating customers’ feedback. The family has the widest pallet of options in the market and will thus fit into all possible custom...
Birkerød, Denmark - JVL Industri Elektronik A/S, one of the world leaders in the field of integrated servo - and stepper motors introduce a new compact and slim stepper motor. The new ServoStep integrated stepper motor series MIS171 to MIS176 have a NEMA17 42x42mm flange and include controller with 6 different industrial Ethernet protocols, absolute multiturn encoder, closed loop and M12 connectors. This new motor family is based on the latest microprocessor and cooling technology and an advancement compare...
Birkerød, Denmark - JVL Industri Elektronik A/S, one of the world’s leading producers in the field of integrated servo and stepper motors, is announcing yet another industrial Ethernet protocol for its integrated servo motors and integrated stepper motors: SERCOS. Ready for Industry 4.0 and IIoT (Industrial IoT) The JVL Sercos module is equipped with two Ethernet connectors and a built-in switch, enabling line and ring topology without any extra expensive hardware. The JVL Sercos module has several LEDs, en...
QuickStep, the Integrated ServoStep Motors from JVL.
A wealth of possibilities in a NEMA23 series of the worlds most compact stepper motors with the highest microstepping ...
JVL showas the new QuickStep® integrated stepper motor in NEMA43 with RS485 programmable motion controller and optional industrial Ethernet, wireless and absolute ...
JVL is now expanding their range downwards introducing the QuickStep® types MIS171 to MIS176. These integrated stepper motors are size NEMA 17 with flange 42x42mm ...
In the case of Profinet, the netX 50 series communication processor from Hilscher has been selected. One of the big advantages of this choice is that the expansion ...
In the case of Powerlink, the netX 50 series communication processor from Hilscher has been selected. One of the big advantages of this choice is that the expansion ...
Stepper Motor Controller with PLC, CANopen and 8IO
A Stepper Motor Controller with RS485 and CANbus serial interface. 8IO can be configured to input, output or ...
- 100% stainless steel shaft, flange, tube and rear end cover
- Special Teflon sealing for long lasting watertight operation
- Cost-Effective in harsh wet corrosive ...
In the case of EtherNet/IP, the netX 50 series communication processor from Hilscher has been selected. One of the big advantages of this choice is that the expansion ...
The EtherCAT technology overcomes the system limitations of other Ethernet solutions: The Ethernet packet is no longer received, then interpreted and copied as process ...
QuickStep, the Integrated Stepper Motors from JVL. A wealth of possibilities in a series of compact stepper motors.
The motors are basically available in 3 sizes:
The MIS motor - the complete motion solution
Stepper motor with integrated controller
All necessary components in one unit
The basic idea in the MIS motors ...
MAC motor®s are complete servo systems including a high-dynamic AC servo motor, hall-sensors, encoder, power supply, driver and positioning controller, as well as ...
The MAC motor - the complete motion solution
Brushless servo motor with integrated controller
All necessary components in one unit
The basic idea in the MAC ...
MAC400 - The complete solution for medium power ratings.
With built-in mains power supply.
Choose between model with or without brake.
Also in IP66 version.