Advertisement
HANNOVER MESSE 2018, 23 - 27 April
Homepage>Exhibitors & Products >Multifunction multimeters - EMM

Multifunction multimeters - EMM

Contrel elettronica

Exhibitor details
Logo Multifunction multimeters - EMM

Exhibition stand

Hall 12, Stand C10
Open Exhibition Grounds map

Product description

The digital multifunction meters of the EMM series allow the measure of the main electrical parameters of the electrical energy distribution networks. The local visualisation of more than 30 measured parameters is made with the usage of 4 red LED displays, in order to guarantee a reading clear and simultaneous of different measures. Intuitive selection of measures, that have to be visualised with a LED signal, completes a very simple frontal panel, but also supplies a lot of information.



INPUTS

The EMMs have measuring inputs for three currents andthree voltages in order to be adapted for their use in one-phase networks, on three-phase networks in devices with 4 and 3 wires without neutral or neutral not distributed. The instrumentsare fully auto-range with the measuring unit indication in Kilo or Mega by corresponding indicative LED.



MEASURES - VISUALISATION

Measures are carried out in a real effective value of voltage. Current, frequency, temperature and all the other calculated parameters are visualised on 3 digit displays. On displays it's possible to read at the same time every single phase of selected parameter's value. On fourth display it's possible to visualise parameters that are not foreseen to be subdivided in individual phase and in visualisation of three-phase value of tension of phase and phase-to phase tension.



APPLICATIONS

Use of digital EMM multimeters is suggested in all those applications that foresee local visualisation of electrical parameters. Therefore typical applications will be those of the energy distribution boards, either in the industrial fields or either for machines,motors, generators and so on. Immediate and simple reading in clear displays of 8 segment LED, dot-form LED for the identification of visualised parameter andonly three button of intuitive functionality, do not exclude that this device could be used in most simple applications.

Product website

Product categories

Download(s)

All products offered by this exhibitor

Temperature monitor device - CTT

Programmable thermal control unit up to 8 inputs from Rtd Pt100 sensors. - Programmable alarm, trip and ventilation threshold on each input - It shows the parameters and measures on 2 ample digital displays, added function of maximum values memory, it displays automatically the highest temp - Extendend ...read more

Multifunctional ammeter - ELM

These could be used for measuring differential or residual currents (up to 4 simultaneously) with an external toroidal reduceror for measuring networks current (eventually also networks divided each other, up to 4 simultaneously) with external CT. Current inputs - 4 inputs 0,5 ÷ 5 A rms from ...read more

Multifunction multimeters - EMM

The digital multifunction meters of the EMM series allow the measure of the main electrical parameters of the electrical energy distribution networks. The local visualisation of more than 30 measured parameters is made with the usage of 4 red LED displays, in order to guarantee a reading clear and simultaneous ...read more

Multifunction multimeters - EMM

The digital multifunction meters of the EMM series allow the measure of the main electrical parameters of the electrical energy distribution networks. The local visualisation of more than 30 measured parameters is made with the usage of 4 red LED displays, in order to guarantee a reading clear and simultaneous ...read more

Multifunction multimeters - EMM

The digital multifunction meters of the EMM series allow the measure of the main electrical parameters of the electrical energy distribution networks. The local visualisation of more than 30 measured parameters is made with the usage of 4 red LED displays, in order to guarantee a reading clear and simultaneous ...read more

Hospital insulation monitoring - PR-5

The PR remote signalling panel enables to contro lthe alarms from the insulation monitoring devices from remote. Alarms shall be delivered to all rooms under supervision of medical or technical personeel. The PR panels provide an acoustic and luminous indication for low isolation or thermal and electric ...read more

Hospital insulation monitoring - HRI-R24

HRI-R24 tests the earth insulation of 24 V a.c./d.c. circuits and is particularly suitable for medic allocations (IT-M systems) in which both 24 V and 230 V lines are present; in these environments, it is important to have a permanent control of the low voltage line as, in the event of a fault or short-circuit, ...read more

Alarm system - COMPALARM G

Remote management of electrical devices is an increasingly widespread requirement in residential and commercial sector. At the same time, remote control and command of loads are essential functions in many industrial processes, in particular unsupervised ones. New COMPALARM G, GSM modules, meet any ...read more

Alarm system - COMPALARM C3/sq

COMPALARM C3/sq is a very attractive and economic alternative to the traditional signalling lamps, by grouping 12 light signals. COMPALARM C3/sq in a very compact enclosure 72 mm x 144 mm is available in different versions of various different voltages, by accepting either d.c. or a.c. power supply. ...read more

Alarm system - COMPALARM CM

The COMPALARM CM devices allow to maintain the information of the parameter in avery or alarm, even without the auxiliary power supply or voltage black out. As a matter of fact, whenever any parameter fails and it is associated to an alarm signal, the mobile flag-sited at the front panel - will turn ...read more

Alarm system - COMPALARM C0/sq

The COMPALARM C0/sq is a very attractive and economic alternative to the traditional signalling lamps, by grouping 3 or 4 light signals. COMPALARM C0/sq in a very compact enclosure 48 x 48 mm is available in different versions: C0.3/sq three lights points and C0.4/sq four lightspoints: these versions ...read more

Alarm system - COMPALARM C2C

The COMPALARM C2C is a very compact and efficient alarm system, suitable for 12 points connection, with NO or NC input contacts and LED signals. This system is suppliedin a 96 mm x 96 mm enclosure for flush mounting. An easy alarm's description printing, easy wiring by plug-in terminals and a good front ...read more

Alarm system - COMPALARM AP

The COMPALARM AP is a point alarm system, with as many normally closed input contacts. It gives the possibility of selecting the alarm sequence according with 30 x 30 mm cells, fitted with ultra bright white LED's, achieving a low power consumption and a lamp maintenance free operation. The interconnecting ...read more

Alarm system - COMPALARM A

Version for installation in electrical boards, with two different options, as a prewired execution and a splitted execution. The system is composed by: - Alarm card - Power supply and flashing card - Relay card - Timing card - Card holder unit - Power transformers and Dc/Dc converters - Signalling ...read more

Stored items

0

Server communication error: Item could not be saved.