HANNOVER MESSE 2019,
01 - 05 April
Sintering parts are high-precision components, which are made of metal powders using special processing methods. Sintering is done by pressing the metal powders into a mould under controlled pressure and is then melted under a protective gas. This leads to a part with high tensile strength. This processing method is characterized by:Design latitude and high precision in two-dimensional areas. Tolerances of quality level IT 7 - IT 8 are easily achieved without additional work and for that reason Sintering is very qualified for the production of gears and hydraulic parts. Approved materials - Usually iron and copper are the basis for the used material. Depending on the individual application they may be alloyed with chrome, nickel or other elements. Very good antifriction properties can be achieved by impregnation with oil or other lubricants.Economical and ecological processing methods - With a minimum of material loss and efficient production steps, high precision parts can be manufactured, which are either ready to use or can, if necessary be further machined.
iPowder® stands for unique green part and as sintered chemical and mechanical properties.
Due to the special process water, grain boundaries, and H2 corrosion will ...
Materials: S235, S355, fine grained steel, aluminium, et al.
Extended aptitude certificate according to DIN 18800-7 part E (steel), DIN 4113-3.
Weight per piece: ...
Stamping is a metalworking process by which sheet metal strips are punched using a press tool which is loaded on a machine press or stamping press to form the sheet ...
Die Casting is the process of forcing molten metal under high pressure into the cavities of steel molds, called dies. Dies range in complexity to produce any non-ferrous ...
This forming technology drop forges or presses the warm or cold raw material into two or more multi-part moulds (closed-dies).
When drop forging parts, the structure ...
Casting your ideas:
We will gladly consult and assist you in choosing the right process whether it be; sand casting, shell mould casting, centrifugal casting, precision ...
Investment casting according to the lost wax method is a very old casting process, having been used in ancient Egypt for the production of art and cult objects. ...
Turning, CNC turning, or manual turning is the process used to produce cylindrical components in a lathe.
No matter if easy or highly complex torn parts, USD is ...
Powder Metalurgy (PM), also called Metal Injection Moulding (MIM), allows sophisticated and near-net-shape products of high complexity without (in most cases) needing ...