HANNOVER MESSE 2018, 23 - 27 April
Homepage>Exhibitors & Products >Thin film synthesis

Thin film synthesis

LEI Lithuanian Energy Institute

Exhibitor details

Exhibition stand

Hall 2, Stand A27

Product description

Films of various metals, semiconductors, oxides, hydrides and other materials can be made by 3" and 4" magnetrons as well as E-beam evaporation processes in inert and reactive gas atmospheres. RF, DC and pulsed-DC power sources are available.

All products offered by this exhibitor

Thermal decomposition technology

Innovative thermal decomposition technology for sewage sludge and hazardous waste utilization With an expanding infrastructure of wastewater collection and treatment, a resulting amount of sludge increases proportionally. Large sludge quantities are accumulated at its storage sites and therefore, management more

Structural integrity assessment

1. Strength analysis of structures, piping and components in complex technical systems, 2. Static and dynamic analysis, 3. Finite element analysis, 4. Linear and non-linear analysis, 5. Analysis of components containing more

Risk of technologies and energy security

1. Risk, hazard and reliability analysis of industrial sites, 2. Assessment of energy security of supply, critical infrastructures protection, 3. Reliability assessment of processes in net systems, 4. Externals events analysis, 5. Failure analysis and engineering assessment for complex technical more

Safety of Fusion Reactors

1. Safety assessment, 2. Accident analysis, 3. Thermal-hydraulic analysis, 4. Neutron transport simulation, 5. Activation analysis, 6. Radiation doses estimation, 7. Strength analysis, 8. Uncertainty and sensitivity more

Safety of Nuclear Installations

1. Thermal-hydraulic analysis of accidents and transient processes, 2. Assessment of thermal-hydraulic parameters in NPP containments and other premises, 3. Simulation of neutron dynamics in reactor core, 4. Simulation of radionuclides and aerosols transport, 5. Modelling of processes in nuclear fuel more

Safety of RadWaste, Decommissioning

Safety of RadWaste and Spent Nuclear Fuel Facilities, Decommissioning: 1. Modelling of SNF characteristics. Modelling of the criticality, dose rates, activation, heat removal from SNF dry storage containers. Preparation Safety Analysis Reports and Environmental Impact Assessment Reports; 2. Modelling more

Hydrology modelling

1. Impact assessment of climate change on water bodies; 2. Analysis of change of extreme hydrological phenomena of water bodies; 3. Digital modelling of waves, hydrological and hydrodynamic processes, and sediment transport in water bodies; 4. Environmental impact assessment of anthropogenic activities more

Systems Control and Automation

1. Deployment of smart grid technologies in power networks: strategies, scope, performance, costs; 2. Analysis of the integration of ICT for the control of transmission and distribution grids; 3. Monitoring and control algorithms for power system, networks and facilities; 4. Development of operational more

Scientific renewable energy research

1. Wind measurements; 2. Analysis of wind conditions, selection of wind turbine locations, modelling of environmental impact; 3. Energy efficiency research; 4. Renewable energy application feasibility studies; 5. Renewable energy project development and more

Sample analysis and characterisation

Sample analysis and characterizationread more

Plasma processing

Low temperature plasma processing of metals, polymers, organic and other substances can be realized in one of the several vacuum more

Thin film synthesis

Films of various metals, semiconductors, oxides, hydrides and other materials can be made by 3" and 4" magnetrons as well as E-beam evaporation processes in inert and reactive gas atmospheres. RF, DC and pulsed-DC power sources are more

Accredited and notified services

According EN ISO/IEC 17025 to carry out tests for: 1. Plastic pipes (dimensions, impact resistance, resistance to internal pressure, ring stiffness, leak tightness, resistance to dichloromethane, tensile properties, longitudinal reversion, etc.); 2. District heating pipes, pre-insulated bonded pipe systems more

Accredited and notified services

Accredited against EN ISO/IEC 17025 to perform: 1. Calibration of measuring instruments for liquids and gas flows; 2. Testing water and thermal energy meters, heating appliances, solid biofuel and solid recovered fuel. Accredited against EN ISO/IEC 17020 as the type A inspection body to perform: 1. more

High-temperature material testing

The researchers of Plasma Processing Laboratory worked hard by experimenting with numerous of samples made of various materials, used for producing space shuttle hulls of the former Soviet Union. The effect of plasma also high temperature and velocity jets and flows to the changes of structure and properties more

Plasma sprayed coatings

Plasma spray technology for surface formation was applied for deposition of catalytic, tribological and protective coatings as well as for hard ceramic coatings, which are employed for improving the operational characteristics of constructional material surface layers in mechanics, chemistry, energy more

Manufacturing of DC plasma sources

Plasma Processing Laboratory develops new atmospheric pressure DC plasma sources with plasma generators up to 200 kW of capacity for wide range of more

Ceramic fibre

Plasma technology is the only alternative to obtain a high-quality high-temperature resistant ceramic fibre. Plasma formed fibre has unique properties such as resistance to high temperature, low thermal conductivity and high chemical stability. For melting and stringing of ceramic materials and forming more

Stored items


Server communication error: Item could not be saved.