Advertisement
HANNOVER MESSE 2018, 23 - 27 April

VOTANO 100

Accurate and mobile voltage transformer testing and calibration system

OMICRON electronics

Exhibitor details
Logo VOTANO 100

Product description

VOTANO 100 can test all important parameters of voltage transformers quickly and with minimum rewiring. The measured results are automatically assessed in accordance with IEEE and IEC standards. Using VOTANO 100 voltage transformers up to 0.1 accuracy class can be calibrated in the field in less than 15 min.

Its light-weight design makes it ideal for on-site tests and calibration tasks in power system grids, production facilities, and test/development labs. VOTANO 100 is supplied with the separate voltage booster VBO2. This 4 kV amplifier provides the necessary test voltage during the ratio measurement.

Applications
- Determination of VT ratio and phase angle accuracy
- VT winding resistance measurement of secondary windings
- Determination of magnetization characteristics
- Leakage reactance measurement
- Class verification of VTs with up to 5 secondary windings can be done within one measurement cycle (including open delta winding)
- Burden measurements

Your Benefits
- Very high accuracy allows field calibration of VTs up to the 0.1 accuracy class
- Excellent mobility through compact size and low total weight (15 kg / 33 lbs)
- Automated measurements with minimum rewiring
- Automatic result assessment as per IEEE and IEC standards directly after the test
- Short testing time compared to conventional methods (< 15 min)

Product website

All products offered by this exhibitor

CMC 430

With its low weight of just 8.7 kg / 19.2 lbs the CMC 430 is the preferred choice for test engineers in cases where excellent transportability is needed and three currents up to 12.5 A or six voltage outputs are sufficient.read more

SVScout

Software tool for visualizing IEC 61850 Sampled Valuesread more

CMS 356 Voltage and current amplifier

The CMS 356 is a voltage and current amplifier for analog low-level signals provided by a CMC test set or by any other signal source, such as a digital real-time power system network simulator. When used in combination with a CMC test set, the amplifier extends the capabilities of the test set to provide ...read more

COMPANO 100

Winner of the iF Design Award 2017 in the discipline Products, category Industry & Skilled Trades COMPANO 100 is the universal and easy to use solution for all types of basic testing duties in electrical energy systems. Controlled electronic sources allow the user to obtain exactly the desired value ...read more

ARCO 400

Universal test set for recloser controlsread more

TESTRANO 600

Three-phase power transformer test systemread more

Testing Solutions for Recloser Controls

OMICRON offers a comprehensive range of testing solutions and the relevant adapters or cable packages (accessory to protection test sets) for testing various recloser and sectionalizer controls. For a broad range of applications in this field, ARCO 400 (our dedicated plug-and-play recloser test set) ...read more

TANDO 700

TANDO 700 system offers precise measurement of dissipation/ power factor (Tan Delta) and capacitance for testing insulation in high-voltage equipment. TANDO 700 also measures power, current, voltage, impedance and frequency. The easy-to-use software offers various functions for real-time data display, ...read more

DANEO 400

Hybrid signal analyzer for power utility automation systemsread more

CMC 310 Protection Testing Device

This video will show you the easy and intuitive use of modern protection testing tools even when rarely used. Please find more interesting product and application videos in various languages under: https://www.youtube.com/user/OMICRONenergy/featuredread more

RelaySimTest protection testing software

Zeiteffiziente, simultane Prüfung beider Relais und deren Kommunikationsverbindung. Weitere interessante Videos in vielen Sprachen zu Produkten und Anwendungen finden Sie auf unserem Youtube-Kanal: https://www.youtube.com/user/OMICRONenergy/featuredread more

OMS 605

The OMS 605 is a portable partial discharge (PD) monitoring system designed for inspections of high-voltage assets under load. It can be employed for temporary and periodic, condition-based monitoring. Measurements are performed at the assets one after the other. The OMS 605 can be easily connected to ...read more

MONGEMO

On-line partial discharge monitoring system for rotating machinesread more

OMS 800

The OMS 800 system is designed to perform partial discharge (PD) after-installation testing and continuous monitoring of HV XLPE cable systems, either in underground tunnels or at buried cables. It can detect and locate partial discharges in cables and accessories (joints, terminations) simultaneously. The ...read more

VOTANO 100

VOTANO 100 can test all important parameters of voltage transformers quickly and with minimum rewiring. The measured results are automatically assessed in accordance with IEEE and IEC standards. Using VOTANO 100 voltage transformers up to 0.1 accuracy class can be calibrated in the field in less than ...read more

CMControl R

The CMControl R is a front panel control for CMC protection test sets specifically designed for testing recloser and sectionalizer controls with the protection testing devices CMC 356, CMC 353, CMC 256plus, and CMC 256-6. With its comprehensive software tools, the intuitive touchscreen control concept ...read more

ADMO

Dieses Video zeigt Ihnen wie Sie die Daten ihres Schutzsystems mit ADMO verwalten. Weitere interessante Videos in vielen Sprachen zu Produkten und Anwendungen finden Sie auf unserem Youtube-Kanal: https://www.youtube.com/user/OMICRONenergy/featuredread more

ISIO 200

ISIO 200 is a simple and versatile binary I/O terminal for Substation Automation Systems (SAS). It communicates via IEC 61850 GOOSE messages and, therefore, interoperates with a wide range of intelligent electronic devices (IED) or CMC test sets supporting GOOSE. Integrate ISIO 200 as a component in ...read more

CMControl P and CMControl P App

The simple and easy way of manual protection testingread more

Primary Test Manager Software (PTM)

The Primary Test ManagerTM (PTM) is the ideal software tool for diagnostic testing of power transformers, current transformers, and circuit breakers. PTM guides the user through the testing process with easily comprehensible testing procedures and detailed wiring diagrams. Tests can be automatically ...read more

CIBANO 500

Test system for medium- and high-voltage circuit breakersread more

IEDScout

The versatile tool for working with IEC 61850 IEDsread more

RelayLabTest

Simulation-based type and acceptance testingread more

CP CU1

The CPC 100 + CP CU1 measure line impedances and k-factors on overhead lines and power cables. Ground impedances can also be determined on large systems with the CP CU1, as well as touch and step voltages. Mains frequency malfunctions do not influence the measurements, as the CPC 100 + CP CU1 use variable ...read more

PDL 650

System for acoustic partial discharge localizationread more

CMControl

The CMControl is a PC-independent control alternative for CMC protection test sets, specifically designed for quick manual protection testing in the field. The device can either be attached to the CMC test set or be detached and used as a flexible handheld control. The CMControl supports the following ...read more

CMC 850 protection testing device

The CMC 850 is OMICRON's protection test set dedicated to IEC 61850. It focuses on the real-time communication methods of GOOSE and Sampled Values to interface with the devices under test. Like all other CMC test sets, the CMC 850 is controlled by OMICRON's proven Test Universe software. It also offers ...read more

CMC 353 protection testing device

With its compact design and low weight of 12.9 kg / 28.4 lbs, the CMC 353 provides the perfect combination of portability and power. It is the ideal test set for three-phase protection testing and the commissioning of SCADA systems. The powerful current outputs (3 x 32 A / 430 VA) optimally support 5 ...read more

CP TD1

Combined with the CPC 100, the CP TD1 measures the capacitance and dissipation factor (power factor) with laboratory precision. This allows the insulation condition of transformers, generators and other parts of high-voltage systems to be tested according to IEEE 62 (C57.152), IEC 60076-1 and -3, as ...read more

MPD 500

The MPD 500 simplifies measurement of partial discharges in electrical insulation. The system has been specially developed for routine tests and tests with high throughput. The decisions required for this are supported by the clearly structured pass/fail functionality. The highest degree of safety is ...read more

Switch Box CP SB1

The CP SB1 is an accessory for the CPC 100 and simplifies measurement of three-phase power transformers. The transformer ratio and winding resistance are automatically measured in all three phases (in sequence) in all tap changer positions. The measurement results are recorded by the CPC 100 and can ...read more

CPC 100

Universal testing device for electrical diagnosticsread more

MPD 600

The MPD 600 is a highly developed device for measuring partial discharges (PD). With excellent tools, even the smallest PD pulses are separated from interference and analyzed. The MPD 600 is suitable for many different PD testing applications. Cable, transformer and machine manufacturers use the MPD ...read more

FRANEO 800

Sweep frequency response analyzerread more

DIRANA

FDS-PDC Dielectric Response Analyzerread more

CT Analyzer

The CT Analyzer automatically determines all relevant current transformer values and compares the results with the selected standard. The device evaluates the current transformer as per the IEC or IEEE standard within seconds with the push of a button. It facilitates fast and economical on-site testing ...read more

CMC 256plus protection testing device

The CMC 256plus is the first choice for applications requiring very high accuracy. This unit is not only an excellent test set for protection devices of all kinds but also a universal calibrator. Its high precision allows the calibration of a wide range of measuring devices, including: energy meters ...read more

CMC 356 protection testing device

The CMC 356 is the universal protection test solution for testing all generations and types of protection relays. Its powerful six current sources (three-phase mode: up to 64 A / 860 VA per channel) with a great dynamic range, make the unit capable of testing even high-burden electromechanical relays ...read more

Stored items

0

Server communication error: Item could not be saved.