Eldon provides an extensive range of wall mounted enclosures in mild steel and stainless steel (304L and 316L types) that meet all environmental requirements. Mild steel enclosures are pre-treated with iron phosphate, demineralized and protected with epoxy-polyester powder paint RAL 7035 with structured finish. Stainless steel enclosures have a 240s pre grained finish (average 0.5 microns).
Sturdy cruciform body folded from cold pressed sheet steel plate. The enclosure`s edge is folded in the shape of a channel to avoid water stagnating on the seal.
Enclosures are available in single door and double door designs in both materials, and a mild steel panel enclosure is also available. Single doors are closed by one, two or three points locking system and double doors by means of three point espagnolette systems. Doors have also a seamless polyurethane gasket and in 316 stainless steel enclosures, doors have silicone gasket.
The door opens within the outer dimensions of the enclosure body allowing enclosures to be mounted directly next to each other without the door interference.
Enclosures can be secured to the wall using: bolts, directly through the rear wall and protected inside with plastic washers, or wall mounting brackets at the rear screwed from the enclosure. In both cases the IP / TYPE ratings are guaranteed.
Enclosures offer maximum protection to the user and equipment thanks to the high protection degree IP 66 - IK 10 according to EN 60529 and EN 62208 (IP 55 IK 10 for enclosures with
The Eldon wall mounted steel range is certified according to the most relevant international standards, such as UL 508A, CSA 22.2, GOST and KEMA-KEUR, offering the guarantee that the enclosures are thoroughly tested and meet all safety regulations.