How data glasses are revolutionizing firefighting
Zwickau University of Applied Sciences is at HANNOVER MESSE 2019 to unveil an innovative mask that enables firefighters to find their way around burning and smoke-filled rooms. The system combines a respiratory mask with integrated data glasses and spatial localization electronics.
Firefighters in heavily smoke-filled buildings can easily become disoriented in what are usually unfamiliar surroundings. In the worst case, this can be fatal. That's why a standard procedure has now become firmly established in such situations, with firefighters searching for people in need of help in pairs. Unfortunately, firefighters often have to rely solely on their sense of touch and can lose contact with each other without realizing. The conditions of the situation then generally make it more difficult for them to find their partner again. The Faculty of Electrical Engineering at Zwickau University of Applied Sciences (WHZ) has been addressing this problem and is presenting the fruits of its efforts at HANNOVER MESSE 2019 - an innovative new firefighting mask.
The innovation centers on a pair of data glasses integrated into the mask. This enables firefighters to move around in poorly lit or smoke-filled buildings. It also provides them with important information in their field of vision, such as a layout plan, evacuation plan, instructions from the unit commander, and their own vital signs," says Professor Rigo Herold from WHZ. This autonomous "navigation and communication solution" uses three lightweight ultra-wideband (UWB) radio nodes that are incorporated into the firefighters' protective clothing. Innovative technology that combines distance and angle of arrival calculations can be used to analyze three essential individual signals to determine the relative positions of the firefighters in relation to each other. However, this application presented some very tough technical challenges. All the optical equipment, electronics and power supply needed to be integrated into the mask without impairing the wearer's field of vision. All the mask's components also had to be airtight. Other essential features include heat resistance and mechanical stability. To help meet these requirements, the researchers at WHZ were able to draw on the expertise they gained in previous research projects on data glasses for steel workers and printers.
Zwickau University of Applied Sciences (08056 Zwickau, Germany), Hall 2, Stand A38
Contact: Silke Dinger
Tel.: +49 375 536-1050
Always good to go
...thanks to the green 'sharing points' located at ARAL filling stations in Berlin. Germany’s largest gas station operator is taking part in an experiment conducted by Berlin-based start-up GreenPack to trial a new eco-friendly energy infrastructure.
GreenPack mobile energy solutions GmbH is a Berlin-based start-up that has set out to establish a mobile, sustainable energy network to help drive forward the shift toward alternative forms of energy and mobility. As part of its dedicated efforts to develop, manufacture and distribute an intelligent standardized battery pack system, GreenPack is adopting a comprehensive Battery-as-a-Service (BaaS) approach. The company hopes to help business and site partners benefit from numerous electric mobility applications - such as electric cargo bikes, e-scooters and electrical gardening machinery - more cost-efficiently and without running any risks. The start-up is appearing at HANNOVER MESSE 2019 to showcase a new pilot project in this field.
Aimed at trialing a green energy infrastructure for electric urban transportation, this experiment - the only one of its kind in Germany - is being supported by the gas station chain ARAL. At two Berlin branches of Germany's largest gas station operator, drivers of electric vehicles can now make a pit stop at green 'sharing points' to grab a fully charged battery. Given that it only takes a few seconds to switch batteries, customers no longer have to worry about long waits at a charging station. In particular, the project partners' commercial light electric vehicles benefit from zero downtime, which ensures they can be operated much more efficiently. Moreover, the collaboration between ARAL and BaaS-provider GreenPack proves that filling stations can maintain a key role in the evolving mobility mix. "As established building blocks of the mobility infrastructure, gas stations offer the ideal location for our '‘sharing points'," says Tobias Breyer, operational manager at GreenPack. "Conventional filling stations urgently need electric offerings. ARAL's two pilot sites are a good example of an energy hub of the future that can optimally serve tomorrow's mobility mix," Breyer sums up.
GreenPack mobile energy solutions GmbH (12489 Berlin, Germany), Hall 27, Stand H81
Contact: Sascha Brandenburg
Tel.: +49 421 68445412
Mobile: +49 179 681 67 38
The best of both worlds
ProMinent GmbH is premiering its new smart peristaltic pump DULCO flex Control at HANNOVER MESSE 2019. It is ideal for metering highly gaseous, high-viscosity, abrasive or shear-sensitive media. What's more, it can be integrated into IoT environments via DULCOnneX.
The ProMinent group of companies has been manufacturing components and systems for metering liquids and delivering reliable water treatment solutions for over 55 years. Its extensive range notably includes metering pumps, peristaltic pumps, measuring and control technology, sensors for water parameters, water treatment products such as metering systems for polymers and end-to-end metering systems along with accessories such as chemical storage containers and transfer pumps. ProMinent also supplies process metering pumps and equipment for process and plant engineering in the oil, gas and energy sectors from its own production facilities. The group is now at HANNOVER MESSE 2019 to debut its new DULCO flex Control pump, a peristaltic pump for metering highly gaseous, high-viscosity, abrasive or shear-sensitive media.
DULCO flex Control is a valuable addition to the ProMinent portfolio, offering a smart peristaltic pump designed to ensure linear and reproducible metering in all process conditions. According to its makers, it combines the best of both worlds - valveless metering and the precision of a diaphragm metering pump - while fully harnessing the features of a peristaltic pump. The metering head, developed and patented by ProMinent, ensures users can change hoses quickly and easily thanks to a unique changeover concept that does not require tools. An integrated display provides detailed instructions to guide users step by step through the process of changing a hose. The high-performance hose is made of the thermoplastic elastomer Santoprene and ensures outstanding chemical resistance and a long service life. DULCO flex Control is operated via an intuitive user interface with a click wheel. The ingenious control system promises precise metering and a reduced flow rate in continuous operation up to 10 milliliters an hour. DULCO flex Control can also be fully networked, which makes it IoT-compatible. What’s more, when connected to the DULCOnneX platform, which has been specially developed by ProMinent, DULCO flex Control gets even smarter.
ProMinent GmbH (69123 Heidelberg, Germany), Hall 15, Stand G43 (02)
Contact: Michael Birmelin
Tel.: +49 6221 842-270
A true vision of the smart factory
Bertrandt AG is using a virtual 3D model of a depot at HANNOVER MESSE 2019 to showcase its expertise in a range of different areas. The focus is on smartification, cloud connectivity and mixed reality visualization.
As digitization gathers pace, production facilities and logistics systems are becoming increasingly autonomous, with human workers having to do less and less to control systems. What really counts when trying to run a smart factory smoothly is achieving harmonious collaboration between individual components that are sometimes very different from one another. The scenarios of the future include vehicles driving themselves across factory sites to various loading and unloading points, automated loading and unloading processes for transportation vehicles, and coordination of various vehicles and loading/unloading facilities. At HANNOVER MESSE 2019, Bertrandt AG is using automated miniature trucks in a virtual 3D model of a depot to show how individual components can work together and be deployed in the drive toward smartification, cloud connectivity and mixed reality visualization. "Our exhibit aims to show visitors what an automated depot of the future can look like. This model can be applied to various applications for autonomous vehicles. It isn't limited to factories," says Catherine de Beule, head of software development at Bertrandt.
Yet the scenario on show at the trade fair is only part of what Bertrandt has to offer when it comes to Industry 4.0. The group also provides solutions for capturing, transferring and analyzing machine data and displays this data using state-of-the-art, intuitive applications such as smartphones, tablets and digital control stations. What’s more, it boasts the development expertise to display data using Microsoft HoloLens. The aim is to boost efficiency in industrial companies and continuously optimize processes by digitizing production, thus helping these companies on the path toward predictive maintenance. The extensive Bertrandt portfolio is rounded off with specific solutions such as consulting, designs for cloud architectures, and the development of algorithms for optimum data analysis.
Bertrandt AG (71139 Ehningen, Germany), Hall 2, Stand B52
Contact: Julia Nonnenmacher
Tel.: +49 7034 656-4037
Mobile: +49 171 335 65 71
A real game changer!
According to fischertechnik, the Training Factory Industry 4.0 is the only desktop solution of its kind anywhere in the world. The Fischer Group of Companies is exhibiting this miniature factory at HANNOVER MESSE 2019.
Last year, Fischer Group generated sales totaling 864 million euros with a global workforce of around 5,200. The Group's five divisions are fischer Befestigungssysteme, fischer automotive systems, fischer Consulting, LNT Automation and - last but not least - fischertechnik, which is a firm favorite with people of all ages. Its construction kits are marketed as toys and also as learning aids. What's more, fischertechnik is one of the few remaining toymakers to develop and manufacture its products exclusively in Germany. The company is now exhibiting a desktop Industry 4.0 solution at HANNOVER MESSE 2019.
Proclaimed by fischertechnik to be the only product of its kind anywhere in the world, the Training Factory Industry 4.0 is a handy miniature model that reproduces the various processes in a real-life production operation. A cloud-connected dashboard is designed to display all process steps from customer, supplier and production management perspectives. By simulating factory operations, fischertechnik is looking to provide a digitized, networked representation of the processes involved in placing an order online. Showcased live in Hall 16, fischertechnik factory models are designed to help all kinds of companies demonstrate and plan their digitization activities.
fischertechnik GmbH (72178 Waldachtal, Germany), Hall 16, Stand H11, co-exhibitor with Christiani
Contact: Sandra Roth
Tel.: +49 7443 12-6251
An expert in sophisticated yet practical positioning systems, BAHR Modultechnik is exhibiting a number of new, intelligent modular linear technology solutions at HANNOVER MESSE 2019.
Accurate, robust and flexible linear systems that can be adapted to different applications and product features are required in every branch of industry - from mechanical engineering to medical technology. BAHR Modultechnik GmbH specializes in precisely these kinds of solutions, developing sophisticated yet practical positioning systems for customers around the globe without compromising in the slightest on product quality. This commitment is underlined by the company’s permanent service availability and innovative ongoing development of its portfolio. Visitors to HANNOVER MESSE 2019 can see for themselves just how much progress has been made with the product range in particular.
Once again, BAHR is showcasing the latest intelligent solutions in modular linear technology. Its SMARTTECHS high-performance gantry systems, for example, offer excellent mobility and usability, and are designed to support acceleration resistances of up to ten g. Customers also benefit from travel speeds of up to eight meters per second, a repeat accuracy of plus/minus 0.2 millimeters and the company's years of linear technology expertise. What’s more, intelligent toothed-belt guides and connections on carriages, combined with a compact design, are intended to optimize the options for integration into existing systems. BAHR solutions can adapt to any specific application and are available down to a batch size of just one.
BAHR Modultechnik GmbH (31711 Luhden, Germany), Hall 16, Stand D17
Contact: Cihan Halavurt
Tel.: +49 5722 99330
Taking charge of e-mobility!
Together with its development partners RINSPEED and KUKA, HARTING is at HANNOVER MESSE 2019 to showcase an automated charging solution for the e-mobility charging infrastructure based on DC combo 2 connectors.
The likelihood of a future e-mobility breakthrough depends heavily on how long it takes to charge vehicles and how user-friendly the charging infrastructure is. Until now, long charging times and bulky, heavy connectors have deterred car owners from going electric as much as high acquisition costs and limited ranges. For this reason, fast-charging DC technology (designed to charge vehicles sufficiently within minutes) is just as desirable as automatic charging solutions, as larger charging infrastructures are harder to handle and there is rarely enough space for charging in parking garages or fleet parking lots. As a leading pioneer in this field, HARTING is attending HANNOVER MESSE 2019 with its development partners RINSPEED and KUKA to showcase its visionary automatic charging solution for the e-mobility charging infrastructure.
The consortium has its sights set primarily on e-vehicles used in regional transportation and logistics. If companies are to keep up with the ever-increasing demands placed on delivery times and fleet availability, fast DC charging is surely a must. For instance, Frank M. Rinderknecht from RINSPEED envisions a future in which small, autonomous vehicles deliver goods to customers just in time and without detours - ideally, charging e-vans while they’re being loaded with packages and other materials. The automatic solution HARTING and its partners are bringing to Hannover is their e-charging assistant robot that plugs the DC combo 2 connector into the vehicle’s charging socket and removes it again, along with the cable, once the vehicle is fully charged. This fully automatic process has the vehicle ready to hit the road again in next to no time. What’s more, HARTING has optimized the powerful DC supply to suit the e-charging assistant’s specifications, supplying it with all the data, signals and power it requires.
HARTING Deutschland GmbH & Co. KG (32423 Minden, Germany), Hall 11, Stand C15
Contact: Michael Klose
Tel.: +49 5772 47-1744
Mobile: +49 151 656 226 11
Smart solutions for seamless supply chains
The ZF Group is attending HANNOVER MESSE to demonstrate how its various smart mechanical systems can interact as part of a fully connected supply chain so as to maximize efficiency.
ZF Friedrichshafen is one of the world’s leading developers and suppliers of driveline and chassis technology as well as active and passive safety technology. The company has a global workforce of 146,000 spread across some 230 locations worldwide, generating sales of 36.4 billion euros in 2017. As digitization progresses, ZF is helping more and more vehicles "see, think and act". Every year, the company invests more than six percent of its revenue into research and development with the aim of providing efficient, electric drive systems and creating a world without accidents. At Hannover Messe 2019, ZF is demonstrating how companies can link smart solutions together to achieve seamlessly networked supply chains.
"If you want to optimize logistics in a sustainable manner, you have to take the entire supply chain into consideration. This starts with production, includes internal and external delivery processes, and reaches through to the end customer," says Wilhelm Rehm, the member of the ZF Friedrichshafen AG Board of Management responsible for Commercial Vehicle and Industrial Technology. "We at ZF are ideally positioned in all areas of mobility thanks to our comprehensive systems competence, which enables us to offer smart solutions for each step of a comprehensively interconnected supply chain." ZF is in Hannover to show trade fair visitors what these connected supply chains can look like, while also pursuing its goal of emission-free logistics - guiding visitors through the lifecycle of the electric axle drive system that an international premium car manufacturer is putting into series production this year. The exhibit's starting point is the Group's newly developed test bench for electric drives.
ZF Friedrichshafen AG (88046 Friedrichshafen, Germany), Hall 25, Stand C11
Contact: Cornelia Urlhardt
Tel.: +49 851 4942 556
The nuts and bolts of any system!
REYHER is unveiling its REYHER Rapid Prototyping (RRP) 3D printing service, developed to improve component design, at HANNOVER MESSE 2019. Visitors also have the chance to learn about the wide range of c-parts recently added to the company's new and improved webshop (RIO).
ABC analysis is an inventory management technique that categorizes items from A to C according to their economic significance. Typical c-parts include screws, nuts and washers, which are by no means the most important components in an industrial system or machine, but are still vital to the end product. As one of Europe's leading wholesalers of fastener and fixing technology, REYHER supplies these c-parts to retail and industrial customers all around the world. From its headquarters in Hamburg, the company ensures a reliable supply of c-parts thanks to its customized, flexible solutions and same-day delivery record of over 99 percent. In the run-up to HANNOVER MESSE 2019, REYHER has added an extra 2,000 products to its portfolio to accurately reflect its customers' evolving demand for c-parts. At the same time, the company has also further optimized its RIO (REYHER Internet Order) webshop by offering customers a bespoke breakdown of options tailored to meet their individual needs, thus hugely simplifying its vast catalog of more than 130,000 items.
And if that's not enough, REYHER is also debuting its RRP (REYHER Rapid Prototyping) 3D printing service at HANNOVER MESSE 2019, showing visitors how rapid prototyping can be used to produce plastic and steel prototypes for testing screw joints. The company is also demonstrating various ways for customers to improve component design, cut development costs and reduce their time to market.
F. REYHER Nchfg. GmbH & Co. KG (22769 Hamburg, Germany), Hall 3, Stand K32
Contact: Axel Hahne
Tel.: +49 40 85363 215
Ottobock is primarily known around the world for outstanding medical technology. The company now has its sights set on the world of production and maintenance, and is at HANNOVER MESSE 2019 to showcase its new passive exoskeleton, Paexo, designed to help users carry out strenuous tasks.
One of the major benefits of Paexo is that it’s a passive exoskeleton that doesn’t need a power supply, making it exceptionally lightweight. It is worn close to the body, similar to a backpack, and is said to allow for complete freedom of movement thanks to its design, which is based on natural human movements. Visitors to HANNOVER MESSE 2019 are warmly invited to try out Paexo for themselves.
This cutting-edge exoskeleton is designed to assist employees working in production or skilled trades to carry out physically strenuous activities. According to Ottobock, Paexo truly shines when used to perform overhead tasks. This is because its mechanical cable pull technology transfers the weight from the user’s raised arms to the hips, providing noticeable relief for the muscles and joints in the shoulder area and making overhead tasks much less of a burden. Thanks to its biomechanical design, the exoskeleton is body-friendly, following users' every movement at the workplace so they can walk, sit and pick up objects both naturally and comfortably. What's more, Paexo is said to be the lightest exoskeleton of its kind, weighing in at less than two kilograms. This means it can be worn comfortably for over eight hours, providing noticeable relief for the shoulders and arms during overhead tasks.
Ottobock SE & Co. KGaA (37115 Duderstadt, Germany), Hall 17, Stand G18/1
Contact: Gesa Liss
Mobile: +49 151 4416 1837
Opening up opportunities
In the state-funded open source project BaSys 4.0, Fraunhofer IESE is one of 15 partners devising core concepts and standards for an Industry 4.0 platform. A demonstration model is now on show in Hannover to highlight the related benefits and potential applications.
Increasingly flexible manufacturing processes are helping companies respond faster to changing market requirements and, most importantly, remain strong competitors. This is where 'digital twins' play a key role in networking and digitizing production processes. The Fraunhofer Institute for Experimental Software Engineering (IESE) creates such digital twins using BaSys 4.0 middleware. Heading up a project of the same name, Fraunhofer IESE is now working with a consortium of project partners from industry and research on open source middleware that implements administration shells and digital twins. The aim is to allow production plants to be networked across different layers and manufacturers - from IT on the shop floor through to systems used in the office.
The digital twins created with BaSys 4.0 are designed to provide an exact overview of ongoing production operations at any time, with quality data being collected from different sources, processed and provided to clients for further analysis. Optional service-based manufacturing, meanwhile, enables companies to adapt their production processes with ease. At HANNOVER MESSE 2019, Fraunhofer IESE is using a model factory to showcase a range of solutions run on BaSyx (an open access platform hosted by the Eclipse Foundation) that emphasize the related benefits and potential applications.
Fraunhofer Institute for Experimental Software Engineering IESE (67663 Kaiserslautern, Germany), Hall 2, Stand C22
Contact: Birgit Buck
Tel.: +49 631 6800-2140
The height of innovation
Seeking to impress visitors at HANNOVER MESSE 2019, RK Rose+Krieger GmbH is presenting four innovations in connecting, linear and profile technology. One of its key exhibits is the completely revamped RK Easywork workstation system.
Founded in 1972, RK Rose+Krieger GmbH is now a subsidiary of the global Phoenix Mecano Group. As an end-to-end supplier in the fields of linear, profile assembly, connecting and modular technology, the company's unrivaled product portfolio covers catalog products, system solutions, custom designs and one-off developments. RK Rose+Krieger is a firm fixture at HANNOVER MESSE, returning this year with a string of innovations. Besides height-adjustable variants of its twin and telescopic monitor support arms, a new premium version of its MultiControl II lifting column control, and a new size of its EPX II KG twin-tube linear unit, the company is unveiling its completely revamped RK Easywork workstation system.
Having overhauled its system for task-specific, ergonomic workstations, RK Rose+Krieger logically took the next step of fitting Multilift II lifting columns to its RK Easywork stations - which are now also available in Multilift II standard, impact, telescope and ESD versions. But it doesn't end there! Besides introducing height-adjustable elements, the developers have given the stations a makeover and expanded the range of matching accessories to include ESD table tops, roller conveyors, tool holders and drawer units. What's more, socket strips have replaced the previous power supply channels and, in addition to monitor mountings, customers can now order keyboard shelves and PC connection mountings. The standard color for the basic elements has been changed to gray, but other colors are available on request.
RK Rose+Krieger GmbH (32423 Minden, Germany), Hall 16, Stand E18
Contact: Hartmut Jänisch
Tel.: +49 571 9335-0
Five partners – one pair of wires!
Weidmüller, Phoenix Contact, Reichle & De-Massari, Belden and Fluke Networks are appearing together at HANNOVER MESSE 2019 to showcase their technology partnership for Single Pair Ethernet (SPE).
Leading international trade fairs like HANNOVER MESSE have never just been a stage for "lone wolves" to prowl. In fact, they are increasingly becoming a high-profile platform for strategic partnerships that are driving technological progress. Just in time for HANNOVER MESSE 2019, five companies - Weidmüller, Phoenix Contact, Reichle & De-Massari, Belden and Fluke Networks - have decided to join forces and establish a technology partnership for single pair Ethernet (SPE). In an effort to deliver a coordinated infrastructure for devices, connectors, cables and measuring technology, the partners are jointly developing and supporting the standardized connector patterns introduced in IEC 63171 2 (office environment) and IEC 63171 5 (industrial environment). "Single pair Ethernet is one of the megatrends in industrial data transfer," explains Torsten Janwlecke, President Business Area Device Connectors at Phoenix Contact. According to the partners, SPE no longer specifies new cable and performance records, but instead forms the normative framework for application-appropriate streamlined cabling.
Data cables using just one pair of wires are set to support transfer distances of up to 1,000 meters and transfer rates ranging from 10 megabits per second to 1 gigabit per second. That would make SPE ideal for infrastructure applications in mechanical, plant and process engineering as well as infrastructure in buildings. The main advantage to SPE is that it's environment-neutral, meaning field devices, sensors and actuators can easily be incorporated into an existing Ethernet environment at company level. This eliminates the need for additional gateways and interfaces. "Unlike fieldbus protocols, Ethernet runs through all automation levels. It is more consistent, efficient and cheaper than fieldbus systems," Janwlecke adds.
Weidmüller Interface GmbH & Co. KG (32758 Detmold, Germany), Hall 11, Stand B58
Contact: Horst Kalla
Tel.: +49 5231 14-291190
A big birthday and a top team!
"100 years - one team" is the centenary slogan at WISKA Hoppmann GmbH. The family company has timed the climax of its celebrations to coincide with HANNOVER MESSE 2019, where it is exhibiting as a supplier for industry, the skilled trades and shipbuilding.
"Being successful in team sports is all about having a good squad. What's more, with the best people, work is also more fun. That's the model we're working toward in our centenary year, and we’re inviting our business partners to pay us a visit in Hannover, where we're exhibiting under the slogan '100 years - one team'," explains Ronald Hoppmann, who runs the company alongside his sister Tanja, the third generation of the family to do so. Besides joining in the celebrations, visitors to HANNOVER MESSE 2019 can also check out some of the company’s latest product highlights.
For example, there is the SPRINT cable gland system, which can be used in a whole range of applications, thanks to its modular design. Encompassing everything from standard solutions, bend protection and external strain relief to explosion protection and extreme weather solutions, the WISKA SPRINT system has something for everyone. Besides cable entries, cable glands and junction boxes, WISKA is also exhibiting its Brace conduit line, at the heart of which is the BraceFITTING with a 360-degree hinged cover for simple installation. The Brace system is rounded off with corrugated plastic tubes, metallic conduit screw connections and braided and woven sleeves.
WISKA Hoppmann GmbH (24568 Kaltenkirchen, Germany), Hall 13, Stand C54
Contact: Anja Lange
Tel.: +49 4191 5080
Connect to the cloud for clarity!
The STAUFF Group's exhibits at HANNOVER MESSE 2019 include a new assembly head for processing pipework with very low bending radii and an innovative cloud connection designed to simplify the management of parameter sets.
For more than 50 years, the companies of the STAUFF Group have been developing, manufacturing and distributing pipework equipment and hydraulic components for mechanical and plant engineering and for servicing and industrial maintenance. Among the highlights of recent years is undoubtedly the SPR-PRC-POC cutting ring assembly machine, which was launched in 2015. This compact, versatile table-top device with combined pressure and position control is used for the preassembly and final assembly of cutting rings. However, STAUFF has now made this highly successful model even more versatile, and it's showcasing the result at HANNOVER MESSE 2019 - featuring a new assembly head for processing tubes with very low bending radii.
So what makes the new version so special? The fixture for the cutting ring assembly stud has been moved further up than on the previous standard model, reducing the gap between the tube axis in the assembly stud and the top edge of the machine from 77 to 31 millimeters. As a result, the cutting rings can now easily be fitted to tubes with low axis spacings. When it comes to processing tubes with complex geometries, such as short tube ends and 90-degree deflections, the safety light barrier that protects the assembly area can be deactivated, if necessary. The new assembly head is ideal for tubes with diameters of between 6 and 18 millimeters in the lightweight series and between 6 and 16 millimeters in the heavy-duty series. All users need to do to continue using a pre-existing assembly tool is load new parameter sets into the machine. To simplify this process, STAUFF has also developed a cloud connection for the relevant machine type, which it is also unveiling in Hannover.
Walter Stauffenberg GmbH & Co. KG (58791 Werdohl, Germany), Hall 21, Stand F23
Contact: Boris Mette
Tel.: +49 2392 916-154
For photos and video clips, visit: Trendspots / Produktneuheiten