HANNOVER MESSE 2019,
01 - 05 April
ACTIVE CARBON TOWER
Use of active carbon tower is an requirement for sectors like medical, medicine, electronic, metal foundry, where use of sensitive technology is needed. AAG active carbon towers are single tower pressurised vessels, which are filled with active carbon absorbents that remove the oil vapour within the pressurised air. Other hydrocarbon vapours are also absorbed by the active carbon. Active carbon is activated by the absorbing contaminants that are on the surfaces of the internal holes. This process continue until it reaches to its saturation point. When it reaches at its saturation point, then the active carbon should be replaced.
For complete installation only pipe connection is required.
Features of the tower ;
1- Long life when faced with high level of oil vapour input.
2- It removes the oil odour and oil vapour that is contained with the pressurised air.
3- It provides less than 0.01 ppm w/w oil vapour amount at the outlet.
4- Carbon bed withstands more than 8.800 hours.( inlet air at 37°C saturated with oil vapour at the related flow rate )
5- The design of the tower prevents the movement of bed and failing/contaminating of the carbon at maximum flow rates.
6- Wide beds provide for the required times to reach at the required oil vapour ratio ( 0.01 ppm w/w ) at the outlet.
7- Separate filling and discharge openings make replacement of the carbon easy, hence pipe/pipe line is not required in order to separate/disconnect.
COMPRESSED AIR DRYERS AND GAS GENERATORS
Produces high-purity oxygen gas from compressed air (purity to 93 ±3).
Due to modular design (international patents pending);
Creates the most appropriate solution ...
AAG Nitrogen Generator Unit is designed to amortize your investment by saving from the nitrogen consumption.
It is designed to be installed easily in every indoor ...
» Creates the most appropriate solution to any capacity of nitrogen gas which is required.
» Modular design offers you with ideal and economic opportunities while ...
AFTER COOLER (INTERCOOLERS)
AAG AS Series intercoolers are used in order to reduce the amount of humidity contained in the pressurised air system and to reduce ...
COMPRESSED AIR FILTERS
Purpose of Use of Pressurised Air Filters
Air in a typical city contains approximately 140 million particles per m³ of air as dust. ...
ADSORPTION COMPRESSED AIR DRYERS
Benefits of Using Adsorption Pressurised Air Drier
* Prevents the losses that arise due to malfunctioning
* Increases the ...
Small size full hardware, near wall installation
The heat exchanger in same axis with filters easy bypass
Air dryer can seperate from filters and heat exchanger ...