HANNOVER MESSE 2019,
01 - 05 April
The COMPALARM AP is a point alarm system, with as many normally closed input contacts. It gives the possibility of selecting the alarm sequence according with 30 x 30 mm cells, fitted with ultra bright white LED's, achieving a low power consumption and a lamp maintenance free operation.
The interconnecting possibility allows to design other supervision alarm systems with many extensions.
The alarm systems type COMPALARM AP has been conceived with its very reduced dimensions.
This system has been studied for the most critical uses, i.e. electrical plants in which a malfunctioning of a single component should only harm the function of one channel at most. Each channel is protected by optoisolators, which keep free of any external disturbances. Every channel is fitted with a micro-switch allowing the selection of anormally open (N.O.) or a normally closed (N.C.) contact. The COMPALARM AP allows also the selection of two types of sequences by means of a micro-switch, either ISA1 (ISA A) or ISA2C (ISA M) and for both sequences the first-out function (F1A and F1M), channel per channel.
Programmable thermal control unit up to 8 inputs from Rtd Pt100 sensors.
- Programmable alarm, trip and ventilation threshold on each input
- It shows the parameters ...
These could be used for measuring differential or residual currents (up to 4 simultaneously) with an external toroidal reduceror for measuring networks current (eventually ...
The digital multifunction meters of the EMM series allow the measure of the main electrical parameters of the electrical energy distribution networks. The local ...
Complete monitoring of the installation
- EMA meters the energy values in 4 quadrants. It can monitor the energy consumption, the energy produced and the difference ...
The PR remote signalling panel enables to contro lthe alarms from the insulation monitoring devices from remote. Alarms shall be delivered to all rooms under supervision ...
HRI-R24 tests the earth insulation of 24 V a.c./d.c. circuits and is particularly suitable for medic allocations (IT-M systems) in which both 24 V and 230 V lines ...
Insulation resistance is measured by applying a direct current signal between the isolated line and earth: the level of insulation can be ...
Remote management of electrical devices is an increasingly widespread requirement in
residential and commercial sector. At the same time, remote control and command ...
COMPALARM C3/sq is a very attractive and economic alternative to the traditional signalling lamps, by grouping 12 light signals.
COMPALARM C3/sq in a very compact ...
The COMPALARM CM devices allow to maintain the information of the parameter in avery or alarm, even without the auxiliary power supply or voltage black out.
The COMPALARM C0/sq is a very attractive and economic alternative to the traditional signalling lamps, by grouping 3 or 4 light signals.
COMPALARM C0/sq in a ...
The COMPALARM C2C is a very compact and efficient alarm system, suitable for 12 points connection, with NO or NC input contacts and LED signals. This system is suppliedin ...
Version for installation in electrical boards, with two different options, as a prewired execution and a splitted execution.
The system is composed by:
- Alarm ...