HANNOVER MESSE 2020,
20 - 24 April
AFTER COOLER (INTERCOOLERS)
AAG AS Series intercoolers are used in order to reduce the amount of humidity contained in the pressurised air system and to reduce the temperature of the pressurised air. A copper tube heat exchanger, which is supported by aluminium cooling fins is present. The axial fans direct the ambient air over the heat exchanger for the required cooling to take place. The temperature of the pressurised air cools down to a value, where it is approximately 10°C above the ambient temperature. This cooling process causes high level of water vapour to turn into liquid. This water is separated from the air system by the SA Water Separator, which is mounted at the intercooler outlet.
Use of AS intercoolers protects the equipments like cooled drier, adsorption drier, filters since it reduces the humidity on these units and it provides maximum level of efficiency.
The pressurised pipe intercooler battery is a type, where aluminium fins are pushed over the copper tubes. Cassette and the hood of the fan are made of DKP steel sheet and the collector is made of steel. The maximum operation pressure is 16 bar and the test pressure is 25 bar.
Fans have plastic profile fins and they are angle adjustable high efficiency types.
Motors are three phase with 350 V, 50 Hz and they are fully enclosed types.
The batteries are supplied with stands or without stands, upon request and they are supplied together with DIN 2502 ND 16 flanges and counter flanges. Water separator is included with the delivery.
Produces high-purity oxygen gas from compressed air (purity to 93 ±3).
Due to modular design (international patents pending);
Creates the most appropriate solution ...
AAG Nitrogen Generator Unit is designed to amortize your investment by saving from the nitrogen consumption.
It is designed to be installed easily in every indoor ...
» Creates the most appropriate solution to any capacity of nitrogen gas which is required.
» Modular design offers you with ideal and economic opportunities while ...
ACTIVE CARBON TOWER
Use of active carbon tower is an requirement for sectors like medical, medicine, electronic, metal foundry, where use of sensitive technology ...
COMPRESSED AIR FILTERS
Purpose of Use of Pressurised Air Filters
Air in a typical city contains approximately 140 million particles per m³ of air as dust. ...
ADSORPTION COMPRESSED AIR DRYERS
Benefits of Using Adsorption Pressurised Air Drier
* Prevents the losses that arise due to malfunctioning
* Increases the ...
Small size full hardware, near wall installation
The heat exchanger in same axis with filters easy bypass
Air dryer can seperate from filters and heat exchanger ...