HANNOVER MESSE 2019,
01 - 05 April
Termate manufacture a number of busbar support ranges. We have solutions for numerous phase centres, bars per phase, fault levels, size and orientation of conductors.
MX, a comb style range with variants for phase centres, bars per phase and number of poles
VMS, single pole units. Short circuit rated up to 100kA/1sec
RMS, a single pole rail mounted support. Offering flexibility with the strength of 50kA/1sec withstand
DBBS, specifically designed for pan assemblies and distribution boards. Holds conductors flat with a short circuit rating of 50kA/1sec
FBS, a single pole unit that holds conductors of various thickness. Use numerous conductor widths - buy one product. Proven to 50kA/1sec
All of our busbar supports have been through a rigorous development and proving process. They all meet the requirements of IEC61439 and have UL approval.
Using our CNC router capabilities, we also offer
Customisable products, where you chose critical key dimensions based on a core design
Contract fabrication based on you own designs
Termate’s BP2X range of busplugs are an easy to install versatile off-load busbar plug that achieves IP2X without the need for shutters or cover assembly.
Termate are using the worldwide renowned Hannover exhibition to launch our new range of Low Voltage stand-off insulators.
The Aquila range has three different ...
Termate’s versatile range of through bushings are designed to allow connections to pass through enclosure walls, whilst retaining form 3 or form 4 enclosure separation ...
Termate’s Neutral Link incorporates an easy to use sliding link disconnector. This feature allows you to isolate the neutral.
Ratings of 125A; 250A; 400A; 630A; ...
Termate’s stud type terminal ranges have been always been core products ever since the inception of the company. The ranges cover stud sizes from M4 upto M12 with ...
Temperature rise testing is carried out current carrying assemblies and electrical products. It verifies that whilst in operation, surface and internal temperatures ...
The dielectric withstand, sometimes called high potential or HiPot, test is carried out on products or components to assess the effectiveness of their electrical ...
Partial discharge testing verifies that the insulation system of a component, assembly or product is able to withstand the electrical field applied to it.
Ingress protection, or more correctly International Protection, Testing is carried out on casing and enclosures. It is used to assess the degree of protection the ...
Accelerated ageing or accelerated weathering testing is carried out on products, materials and coatings that will be subjected to periods of time outside. It is ...
Charpy, or Charpy V-notch test, and Izod tests are both carried out on materials. They are both used to access impact strength or toughness of the material. This ...
Climatic testing is carried out on products and materials by applying weather and/or environmental stresses that products and materials undergo in their real-life ...
Salt spray (or salt fog or salt mist) testing is carried out on products, materials and coatings to assess their resistance to corrosion. It is widely used to prove ...
Flame testing is carried out on material and products. It is used to assess how easily the material or product ignites. Other assessments include rate and extent ...
Glow wire testing is carried out on plastic materials used in electrical devices. It assesses the flame-resistant properties of the plastic. As a safety test its ...
Mechanical impact testing is carried out on products. They are used to assess the level of protection against harmful external mechanical impacts such as vandalism ...
Tensile, flexural and compression testing is carried out on products and materials. It assesses their reaction to forces being applied via pulling, bending and crushing. ...
We conduct technical investigations on behalf of manufactures, specifiers and end users.
The scope of the investigations can be reviewing appropriate product ...
Compliance is the conformance to a rule.
We help you in conforming to the rules that make sure your products are safe and fit for purpose.
It is impossible to have all angles covered when it comes to knowledge. Especially when some of those nuggets are only needed every now and then.
What are you ...
How can you make strategically important decisions without being aware of the relevant information?
How can we help?
We share our knowledge and experience
Torsional testing is carried out on products and material. It is used to assess the behaviour of the part or material when twisted. Depending on what you want to ...
Termate’s CNC routing services are the answer when our standard ranges do not fully meet your requirements.
High quality ...
Impulse, or lightening impulse, testing simulates overvoltages such as lightening strikes. It verifies that the insulation and insultation system is able to withstand ...