HANNOVER MESSE 2020,
20 - 24 April
Climatic testing is carried out on products and materials by applying weather and/or environmental stresses that products and materials undergo in their real-life application. Our ability to control these factors can also be used to create specialised and abnormal conditions to prove specific requirements.
Our climatic capabilities
-40°C to +180°C without humidity
+10°C to 95°C with humidity (10-98% relative humidity)
Under all conditions we are able to test:
Electrical equipment while on load
Heat-dissipating material or equipment
Non-heat-dissipating material or equipment
Individual product standards often set the conditions of testing. If you need to put your product through specific proving, our highly experienced test engineers will work with you to create conditions and cycle patterns to meet your individual requirements.
Climatic testing can also be used as a conditioning process. Assessment tests are carried out on pre- and post- stressed samples. The assessment testing proves a particular property of your product or material. Some of these tests we can carry out are:
Mechanical impact testing
Izod and Charpy testing
Cross cut adhesion or cross hatch testing
Colour fastness or light fastness
Climatic testing standards
BS EN IEC 60068-2-30 Environmental testing Part 2-30: Tests – Test Db: Damp heat, cyclic (12 h + 12 h cycle)
BS EN 60068-2-14 Environmental testing. Tests. Test N. Change of temperature
BS EN 60068-2-78 Environmental testing. Tests. Test Cab: Damp heat, steady state
Termate’s BP2X range of busplugs are an easy to install versatile off-load busbar plug that achieves IP2X without the need for shutters or cover assembly.
Termate manufacture a number of busbar support ranges. We have solutions for numerous phase centres, bars per phase, fault levels, size and orientation of conductors.
Termate are using the worldwide renowned Hannover exhibition to launch our new range of Low Voltage stand-off insulators.
The Aquila range has three different ...
Termate’s versatile range of through bushings are designed to allow connections to pass through enclosure walls, whilst retaining form 3 or form 4 enclosure separation ...
Termate’s Neutral Link incorporates an easy to use sliding link disconnector. This feature allows you to isolate the neutral.
Ratings of 125A; 250A; 400A; 630A; ...
Termate’s stud type terminal ranges have been always been core products ever since the inception of the company. The ranges cover stud sizes from M4 upto M12 with ...
Temperature rise testing is carried out current carrying assemblies and electrical products. It verifies that whilst in operation, surface and internal temperatures ...
The dielectric withstand, sometimes called high potential or HiPot, test is carried out on products or components to assess the effectiveness of their electrical ...
Partial discharge testing verifies that the insulation system of a component, assembly or product is able to withstand the electrical field applied to it.
Ingress protection, or more correctly International Protection, Testing is carried out on casing and enclosures. It is used to assess the degree of protection the ...
Accelerated ageing or accelerated weathering testing is carried out on products, materials and coatings that will be subjected to periods of time outside. It is ...
Charpy, or Charpy V-notch test, and Izod tests are both carried out on materials. They are both used to access impact strength or toughness of the material. This ...
Salt spray (or salt fog or salt mist) testing is carried out on products, materials and coatings to assess their resistance to corrosion. It is widely used to prove ...
Flame testing is carried out on material and products. It is used to assess how easily the material or product ignites. Other assessments include rate and extent ...
Glow wire testing is carried out on plastic materials used in electrical devices. It assesses the flame-resistant properties of the plastic. As a safety test its ...
Mechanical impact testing is carried out on products. They are used to assess the level of protection against harmful external mechanical impacts such as vandalism ...
Tensile, flexural and compression testing is carried out on products and materials. It assesses their reaction to forces being applied via pulling, bending and crushing. ...
We conduct technical investigations on behalf of manufactures, specifiers and end users.
The scope of the investigations can be reviewing appropriate product ...
Compliance is the conformance to a rule.
We help you in conforming to the rules that make sure your products are safe and fit for purpose.
It is impossible to have all angles covered when it comes to knowledge. Especially when some of those nuggets are only needed every now and then.
What are you ...
How can you make strategically important decisions without being aware of the relevant information?
How can we help?
We share our knowledge and experience
Torsional testing is carried out on products and material. It is used to assess the behaviour of the part or material when twisted. Depending on what you want to ...
Termate’s CNC routing services are the answer when our standard ranges do not fully meet your requirements.
High quality ...
Impulse, or lightening impulse, testing simulates overvoltages such as lightening strikes. It verifies that the insulation and insultation system is able to withstand ...