HANNOVER MESSE 2019,
01 - 05 April
JVL Industri Elektronik
JVL showas the new QuickStep® integrated stepper motor in NEMA43 with RS485 programmable motion controller and optional industrial Ethernet, wireless and absolute multiturn encoder. The motor is very useful in applications where motors must be very compact, have very high torque at low speed and without backlash as a normal gear would offer.
All the necessary electronics in a stepper system are integrated in the motor itself. JVL has used the newest technology to obtain an incredibly high step resolution of 409,600 step/revolution - resulting in unsurpassed smoothness and silent running. The length is only 146 mm (5,75") for a 10 Nm motor and it is therefore the shortest stepper motor in the world with built-in controller. The motors are available in 2 sizes:
- MIS430 with 10 Nm, Length 146 mm, Flange 110x110mm, 19mm shaft
- MIS432 with 25 Nm, Length 257 mm, Flange 110x110mm, 19mm shaft
The motor contains everything needed to solve a modern control task as stand-alone or controlled from a PLC or PC. 8 I/O points can be individually configured to digital input, digital output or analogue input. Modbus RTU, CANopen or Industrial Ethernet provides easy connections to a PLC or HMI. An ActiveX/OCX driver is available to make interfacing to LabView, Excel, VB or other Windows-programs simple. The MAC motor standard protocol enables MAC motors®, QuickStep® motors and SMC85 as well as SMC75 controllers to be connected on the same RS485 bus with up to 254 axes. With Ethernet or wireless up to 65535 axes.
- Shortest length in the industry only 146 mm for 10 Nm
- Extreme Resolution up to 409600 step/rev equal to 2048 microsteps per fullstep
- Velocity precision 0.01 RPM. Acceleration precision 1 RPM/sec.
- Built-in PLC with 8 I/O: each DI or DO 24V or 0-5V (12bit) analogue input with advanced input filtering
- RS485 up to 2 Mbit and Modbus RTU
- Option: RS422 and RS485 for encoder I/O and connection to external HMI or PLC
- Point-to-point or multiaxis
The MIS motor - the complete motion solutionStepper motor with integrated controllerAll necessary components in one unitThe basic idea in the MIS motors is to minimize ...
The MAC motor - the complete motion solutionBrushless servo motor with integrated controllerAll necessary components in one unitThe basic idea in the MAC motors ...
QuickStep, the Integrated ServoStep Motors from JVL.
A wealth of possibilities in a NEMA23 series of the worlds most compact stepper motors with the highest microstepping ...
- 100% stainless steel shaft, flange, tube and rear end cover
- Special Teflon sealing for long lasting watertight operation
- Cost-Effective in harsh wet corrosive ...
In the case of Profinet, the netX 50 series communication processor from Hilscher has been selected. One of the big advantages of this choice is that the expansion ...
The EtherCAT technology overcomes the system limitations of other Ethernet solutions: The Ethernet packet is no longer received, then interpreted and copied as process ...
MAC400 - The complete solution for medium power ratings.
With built-in mains power supply.
Choose between model with or without brake.
Also in IP66 version.
In the case of EtherNet/IP, the netX 50 series communication processor from Hilscher has been selected. One of the big advantages of this choice is that the expansion ...
QuickStep, the Integrated Stepper Motors from JVL. A wealth of possibilities in a series of compact stepper motors. The motors are basically available in 3 sizes: ...
JVL is now expanding their range downwards introducing the QuickStep® types MIS171 to MIS176. These integrated stepper motors are size NEMA 17 with flange 42x42mm ...
In the case of Powerlink, the netX 50 series communication processor from Hilscher has been selected. One of the big advantages of this choice is that the expansion ...
MAC motor®s are complete servo systems including a high-dynamic AC servo motor, hall-sensors, encoder, power supply, driver and positioning controller, as well as ...
Stepper Motor Controller with PLC, CANopen and 8IO
A Stepper Motor Controller with RS485 and CANbus serial interface. 8IO can be configured to input, output or ...