HANNOVER MESSE 2019,
01 - 05 April
Line/load reactors help to keep your equipment to run longer by absorbing many of the disturbances especially the spikes coming from the electrical system which otherwise damage or shut down your inverters,variable speed controllers or other sensitive equipments.They are the modern technological solution to the problems of the inverter and drive applications.They are very effective at reducing harmonics produced by inverters and drives.
The Benefits of Line Reactors:
- Decrease the harmonic distortion
- Absorb the surges and the spikes
- Decrease the voltage peaks
- Improve the true power factor
- To lengthen the operating life of the inverters
The Benefits of Load Reactors
- Decrease the ratio of dv/dt
- Decrease peak voltage
- Increase the efficiency of the motor
- Decrease the noise of the motor
- Decrease the over heating of the motor
- To lengthen the isolation life of the motor
Our company manufactures medium voltage capacitor banks to compensate the reactive power of medium voltage motors and transformers. They are pressure switch protected ...
Our company produces de-tuned capacitor banks with thyristor switches for factories and facilities, which use lifts, elevators, arc furnaces, welding machines, etc.. ...
We manufacture MV capacitor banks for the MV systems where high reactive power need is present.
Facilities and factories with a high proportion of variable speed motor drives and/or other harmonic generating loads may require a detuned capacitor system. This ...
During the switch of a acapacitor bank ,the switching transient current is very high.The current can even be very close to the short circuit current level.By mounting ...
Our company build de-tuned capacitor bank modules in order to increase the production of low voltage de-tuned capacitor banks. The capacitor bank module has a fuse, ...
Power Transmission and distribution systems are designed for operation with sinusoidal voltage and current waveforms at a constant frequency. However, when non-linear ...
The traditional method of reactive energy compensation is to directly connect the capacitor banks to the main network.
However, it is not suitable to connect the ...
When a motor is driven by a mechanical load in the case of cranes or lifts, it acts as a generator, which converts kinetic energy into electrical energy. If there ...
Limiting fault currents becomes very important at protecting generator windings. For that reason we are manufacturing generator neutral grounding resistor panels ...
Because of the fact that the fault currents at star point grounded mains should be limited, transformers/generators are grounded over star point with neutral grounding ...
We manufacture one phase , three phase and dry type transformators for different applications.
Shunt Reactors are used in the systems where inductive load is needed, such as to eliminate the capacitive load of the cables and to prevent paying reactive energy ...