HANNOVER MESSE 2020,
20 - 24 April
Georg Martin GmbH presents its first non-metallic laminated shims named M-Tech®L Mylar®. They are particularly suitable for the use in lightweight structures as well as mechanical assemblies, in which the electrical insulation is especially involved.The new laminated shim by Martin® is made of the polyethylene terephthalate polyester (PETP) Mylar® from DuPont® and consists of layers of 0.1 mm laminated plastic foils. Mylar® is characterized by; - high tensile strength- tear resistance - chemical, mechanical and thermal stability. - low density of about 1.3 kg /dm3 and is counted among the surface insulating of the class B (up to 130°C) - good electrical insulation (dielectric strength approximately 180 V/µm). Moreover, M-Tech®L Mylar® by Georg Martin GmbH is extremely light, heat and cold resistant and is recommended as an ideal light-weight solution for construction design in which different functional units must be electrically insulated. A central aspect in the development of new plastic shims was the easy handling of the peeling film. M-Tech®L Mylar® can be peeled easily and accurately by hand. Unlike steel, aluminum or brass, the individual foil can be also reused after peeling.Especially in automotive, aerospace, electrical and measuring techniques, there are numerous applications for M-Tech®L Mylar®. Another typical application is the flange insulation in the construction of generators and transformers which Mylar® shims perform here the dual function, as tolerance compensation and the insulating effect!
For use in automobile propeller shafts to protect the universal joint.
Low ductile punched part made of sheet steel.
Material - Cold-rolled slit strip DC04, ...
For use in the propeller shafts of ships' drive units to protect and hold the internal ball bearings of the universal joint and fasten the shock absorber of the ...
For use in automobile propeller shafts to protect and hold the internal ball bearings of the universal joint and cover the propeller shaft.
Highly ductile punched ...
For use in automobile propeller shafts to protect and centre the universal joint at the flange.
Highly ductile punched parts made of steel sheet, pressed in and ...
For use in the homokinetic ball joint of an automobile propeller shaft.
Interior centering for automobiles is punched part made of 2.5 mm thick cementation steel.
Used in the extension arm of sheet-fed offset printing presses. Complex connection part consisting of a housing (punched part) and plastic flange pressed in airtight. ...
For use in automobiles with hybrid drives. To cover and protect electrical plug connections. Punched part made of highly ductile rustproof steel strip.
Area of ...
With M-Tech® - Martin Technology, etched and laser-cut products can be replaced with precision stamping metal foils with simple geometry.As an economical alternative ...
Tolerance compensation in the assembly of components can be optimized to 25 micrometres with the new, high-precision shim (Schichtblech) from Georg Martin GmbH that ...
Edge bonded shims or loose leaf shims M-Tech®P (Lamipac) compensate tolerances in a rapid and targeted manner.The following benefits can be exploited when using ...
Solid shims M-Tech®S makes it possible to adjust the finest tolerance graduations.
A classic tolerance compensation product that we offer is a solid shim that ...
M-Tech®L laminated, peelable Shims for the individual compensation of tolerances.
At Georg Martin GmbH, we manufacture shims from our M-Tech®L laminated spacer ...
Mechanical assemblies from stamped and sheet metal formed parts are beeing created to become precise functional elements. This is achieved by using additional processes ...
M-Tech® self-adhesive metal foils are proposed in form of blanks or stamping parts as per customer's specification. They are very versatile and can easily fulfill ...
M-Tech®F - Metal foil tapes, metal blanks and metal strips on coil
Ready to hand - in constant use!
- As a spacer sheet in tooling.
- For adjustments in engineering.