HANNOVER MESSE 2020,
20 - 24 April
The Isolation Amplifier DS 75000 is used for separation and conversion of bipolar and unipolar mV-signals such as those frequently used for current measuring with shunt resistors or other applications with low sensor voltages.
The input and output range of DS 75000 can be easily set by using DIP switch. Due to the calibrated range selection no further adjustment is necessary.
A switchable compensation of the measuring range can be performed at the Zero/Span potentiometers on the front panel. Also the cut-off frequency can be adapted to the measurement task by using the DIP Switch.
Modbus I/O Modules and Signal Converters
Universal input for Pt, Ni, TC, KTY, mA, V, mV, R, Poti, Hz, PWM
In-Rail-Bus Connector for Modbus and Power
Protective Separation up to 300 V, test voltage 3 kV
The temperature transmitter converts the Pt100 or Pt1000 sensor signal on input to temperature linear standard signal (0 to 20 mA, 4 to 20 mA or 0 to 10 V) and makes ...
Our Alarm Units are used to monitor limit values and control simple automation processes.
- Control And Monitor Standard Signals 0/4 to 20 mA, 0 to 10 V
- Monitoring ...
The Isolation Amplifier is used for isolation and conversion of bipolar and unipolar industrial signals. Due to the easy selection of the input and output ranges, ...
The Signal Splitter/Repeater DN 21000 is used for isolation, conversion and distribution of 0/4 ... 20 mA, 0/1 ... 5 V and 0/2 ... 10 V standard signals. The measuring ...
The Isolation Amplifier is used for isolation and conversion of 0 to 20 mA, 4 to 20 mA and 0 to 10 V standard signals. Due to the calibrated selection of the input ...
The repeater power supply DC 52100 is used to supply and separate 2- and 3-wire transmitters and active sensor signals.
The repeater power supply supplies the transmitter ...
The loop-powered isolator provides galvanic separation for 0(4) to 20 mA standard signals, while transferring the measurement signal to the output with a high degree ...
The Function Signal Converter DN 21400 sets completely new standards concerning variability, safety and reliability in isolation and conversion of industrial ...