micromobility expo 2019,
02 - 04 May
The KOBOLD resistance thermometers comprise a rugged installation
fi tting made of stainless steel with thread, fl ange or
weld-on connection, a connection head out of aluminium casting
and a removable measuring element. The measuring insert
can be replaced without emptying the installation, since the
customised thermowell remains in the installation and seals the
process. The instruments are supplied with the ignition protection
Exd as a standard and therefore can be installed in relevant
A Pt100 temperature sensor according to IEC 751, category A
or B is fi tted in the measuring insert as standard. Depending on
customer request the temperature sensor can be carried out as
2-, 3- or 4-wire circuit.
Alternatively these sensors can be designed as single or double
resistance thermometers. Exceptional the 4-wire version, which
can only be build with one Pt100 due to lack of space.
As an option the resistance thermometers can be supplied with
a head transmitter. Transmitter with a standard 4-20 mA signal,
with HART® protocol or with PROFIBUS®/Fieldbus are there to
Beside the available resistance thermometers according to DINstandard,
there are customised versions relating to the immersion
length, the connection head, the materials, the process
connection or the tolerance classes deliverable on request.
Oval gear flowmeters are categorised as positive displacement
flow technology. When liquid flows through this type of positive
displacement flowmeter, two oval ...
The new flowmeter MIM was developed for measuring and
monitoring smaller- and medium-sized flow of conductive
liquids in pipes.
The device ...
The KOBOLD Mass Flow Meter model TMU utilizes the Coriolis
principle of operation to measure mass flow. Density and
temperature are simultaneously monitored and ...
KOBOLD limit switches of model NES are used for level
monitoring and pump control of conductive liquids. The design
without any moving parts allows service with ...
The KOBOLD model KAL-... electronic flow monitor continuously monitors
liquid media. It is suited for securely monitoring flows with
minimum pressure loss. Sensitivity ...
Guided Radar Level Transmitter Type NGR
Measuring range: up to 2 m
Connection: G 3/4 , 3/4 NPT male
Material Connection: st. Steel, PTFE
KOBOLD-Magnetic level switches are used for the monitoring and control of liquid levels in vessels. Magnetic level switches are manufactured to customer specification. ...
The immersion and insertion resistance thermometers comprise a rugged sensor made of stainless steel.
Depending on the version, the connecting leads are suitable ...
Digital indicators and controllers for measurement of temperature, current and voltage. The measuring input is set at the factory. The dimension symbols can be adapted ...
The compact transmitter/controller APM-1... measures and controls the pH value or redox potential in aqueous solutions.It is available as panel-mounted device according ...
The flowmeter of the series KMT, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow of compressed air and gases ...
The new KOBOLD type DUK flow meters are used for the measurement, monitoring, metering and dosing of low viscosity fluids.
The devices work on the principle of ...
The compact KOBOLD Vortex flow meter Type DVZ is used for measuring and monitoring smaller and medium-sized flow of low viscosity, water-like liquids in pipes. The ...
The KOBOLD flowmeter DOG-1 and DOG-3 are used for noncontact flow measurement of gases.
The medium flows throught an orifice in a tube. Bypass bores are located ...
The NIR-9 level monitor is suitable for wide applications for bulks and solids in silos and hoppers. Regardless of humidity and conductivity of the product, the ...
KOBOLD bypass levelindicators are used for continous measurement, display and monitoring of liquid levels. The bypass tube is attached on to the side wall of the ...
The KOBOLD Differential Pressure Transmitter model PAD is a micro processor-based high performance transmitter, which has flexible pressure calibration and output, ...
The KOBOLD Pressure Transmitter model PAS is a micro processor-based high performance transmitter, which has a flexible pressure calibration and a flexible pressure ...
The KOBOLD capacitive level indicators type NMC serve to measure liquid levels in tanks. They consits of a measuring probe and a connecting head with a plug-in evaluation ...
NGM uses TDR (Time Domain Reflectometry) technology, which is also known as Guide Microwave or Guided Wave Radar. This means that low-energy and high-frequency electromagnetic ...
The KOBOLD Vortex Flowmeter DVH utilizes three primary sensing elements:
a vortex shedding velocity sensor, a RTD temperature sensor and a solid-state pressure ...
KOBOLD Full Metal Variable Area Flow Meter and Counter for Liquids and Gases Model BGN
The fluid flows from bottom to top through the meter tube of the flow meter. ...
The TME/TMU Series Mass Flow Meter utilizes the Coriolis principle of operation to measure mass flow. Density and temperature are simultaneously monitored and volumetric ...
With the announcement of thermal switches of the series TDD, measuring technology products manufacturer, KOBOLD Messring GmbH located at Hofheim, offers an economical ...
With the processing of up to eight analogue signals, the type ZLS multi-channel data logger by KOBOLD Messring GmbH from Hofheim provides for reliable process monitoring. ...
With four measuring tube widths from G ¼ AG to G 1 AG and thus four measuring ranges from 0.5...4 to 10...100 L/min, the type MIK flow meters of KOBOLD Messring ...