HANNOVER MESSE 2019, 01 - 05 April
KTR Systems
REVOLEX KX as a torsionally flexible pin & bush coupling is used in particular in the high performance range. Due to its new highly stiff and corrosion-protected bushes which are combined with taper-shaped pins it is even easier to maintain today. It goes without saying that REVOLEX KX was tested and certified in accordance with ATEX, too. REVOLEX KX-D uses taper-shaped pins as well which are mounted reciprocally in identic hub components. This design allows for a higher torque with the same dimensions of up to 1,000,000 Nm.
On-site phone: +49 511 89405290
For drives with high loads we would recommend the maintenance-free and torsionally stiff RADEX-N. This coupling is available in many different designs as well, mainly ... more
KTR-STOP brake systems display their full strength as Yaw Brakes for aligning and locking the turbine in the wind. The permanent change between »STOP and GO« requests ... more
The steel lamina coupling RADEX-N was developed specifically for wind power stations: RADEX-N is a backlash-free, maintenance-free steel lamina coupling. The laminas ... more
The KTR-STOP NC line is a passive clamping and braking system. The system generates a clamping / braking effect by applying force to the cylindrical piston rod or ... more
MINEX-S transmits the torque contactless via magnetic forces between internal and external rotor. The containment shroud situated between the rotors allows for a ... more
KTR's high-performance brakes are flexibly designed specifically aiming at covering a large number of applications extending over a wide performance range in different ... more
IntelliRamp is an electronic control system allowing for program-controlled, accurate brake processes. Being combined with IntelliRamp®, our brakes are therefore ... more
- Can be used in all types of wind power stations - High-performance cooler made of aluminium and plate and bar design - If requested, available with KTL coating ... more
For drives with short dimensions having a short shaft distance dimension we would recommend POLY-NORM. The customer is allowed to select among a large number of ... more
For power transmission on I. C.-engines with high mass moments of inertia on the load side BoWex-ELASTIC is the ideally suitable coupling. It dampens high vibration ... more
The MONOLASTIC flange coupling may be used on low-power I. C.-engines without any flange centering. The single-parted arrangement reduces the assembly period again. ... more
For more than 50 years KTR has been a supplier to the hydrauclic industry and for almost 40 years a supplier of more than couplings only. Today KTR is one of the ... more
The recently developed GEARex is a crowned gear coupling fully made from steel. It is lubricated with grease, sealed by toroidal sealing rings and is suitable as ... more
KTR has developed a new standard material for its spiders. The improved polyurethane material T-PUR is resistant to significantly higher temperatures and has a considerably ... more
KTR torque limiters are available in a large variety in order to meet with our customers' requirements. Apart from the programme for chain drives versions with ROTEX ... more
SYNTEX is a backlash-free safety coupling having considerable advantages in price compared to other systems that are common in the market. In particular the integrated ... more
BoWex FLE-PA is the right choice for the use on I. C.-engines on hydrostatic applications. It is solid and long-lived while offering the suitable solution for every ... more
The patented, optoelectronic torque measuring shaft DATAFLEX provides the user with accurate measuring data in combination with an excellent temporal resolution ... more
TOOLFLEX is used if apart from high dynamics high torsion spring stiffness is requested from a coupling. Moreover, the basic coupling characteristics do not change ... more
The wide range of CLAMPEX clamping sets, combined with the extensive stock programme, also for higher performances, allows for an extraordinarily fast availability. ... more
For applications in stationary hydraulics KTR offer 10 different types of the high-power OAC oil/air cooler each producing the requested cooling power via heat exchangers ... more
The hydraulic brake Systems of the KTR-STOP series provide for high clamping forces with low weight, both in an active or spring-actuated design. The application ... more
RIGIFLEX-N as a further development of RIGIFLEX is a maintenance-free, backlash-free and torsionally stiff coupling. Its arrangement corresponds to API 610 or optionally ... more
As a further development of ROTEX the backlash-free ROTEX GS has become the standard for numerous applications in servo technology. The five different spider hardnesses ... more
RADEX-NC is a steel lamina coupling which was developed specifically for servo technology. The double-cardanic design DK combines high torsional stiffness with at ... more
For more than 40 years ROTEX is the standard for elastic jaw clutches. Flexible, resilient, axial pluggable and maintenance-free it conveys the torsional moment ... more
The BoWex Curved-tooth gear couplings® have revolutionized drive technology. They allow to realize a short shaft distance dimension, transmitting the torque reliably ... more
Stored items
0
Get new technology first