HANNOVER MESSE 2020,
20 - 24 April
These components, simple in structure and use, are characterised by their great elasticity and ability to absorb impact, shocks, vibration and oscillations. The various applications all use the same operating principle: the elastic deformation of four cylinders made of natural rubber, placed in the spaces obtained from the mating of two elements with a square section, rotated to each other by an angle of 45°. The cylinders are made of natural rubber. The maximum permissible torsion angle between the two square sections is ±30° and is inversely proportional to the frequency of the oscillations.
The tensioners are used in chain or belt transmissions not only to keep the flexible element taut over time but also to absorb the vibrations created in the mechanisms, ensuring smoother operation and thus increasing the life also of the other components of the machine. All the elastic elements in this catalogue work in a temperature range that may vary between –40°C and +80°C, and in any environmental conditions.
On request we can supply elastic elements coated with a zinc-plating treatment. For outdoor applications, in contact with moist agents, or in the food or pharmaceutical sectors, we can supply our products made entirely of plastic. For applications with temperatures of up to 300°C or with limited overall dimensions we can provide products made entirely of galvanized steel.
All our tensioners can be equipped with numerous interface kits: polyethylene sliding blocks, polyethylene rollers, sprockets and rollers made of galvanized steel or plastic.
We present sprockets and platewheels for chain to DIN 8187, in steel or cast iron, standard or to customer's drawing. In addition to sprockets with pilot bore, we ...
Drive elements performing the connection between rotating shafts while ensuring the compensation for radial, axial and angular misalignments.
Thanks to the superior ...
We produce pulleys for V-belt transmission with 1-10 grooves, in cast iron, also taper bored.
V-belt pulleys are all manufactured according to ISO 4183 and DIN ...
Keyless locking devices for connecting hubs and shafts. Most locking devices are made of taper elements locked to each other by means of tightening screws.
SatiVP Worm gearboxes includes the following versions:
- single gearboxes with PAM pre-arrangement - VP SERIES
- single gearboxes with solid input shaft - VI SERIES
We present toothed racks from modulel 1 to module 8, with ground-finished sides, available in 3 lenghts: 500 mm, 1000 mm and2000 mm. Produced conforming to DIN 3962/63/67. ...
We present Asynchronous three-phase motors. Available with 2, 4 or 6 poles, from 0.12 to 7.5 hp, in different executions.
The motor housing is sealed, and vertilated ...
SatiVTS Worm gearboxes includes the following versions:
- single gearboxes with PAM pre-arrangement - VTS SERIES
- single gearboxes with solid input shaft - VES ...
We present Pulleys for timing belts, available in imperial pitch, metrich pitch and HTD, also taper bored. Materials: steel, cast iron or aluminium.
All parts are ...
POLY-V pulleys are all manufactured according to ISO 9982. The material used for the construction of these pulleys is cast iron EN-GJL-200 UNI EN 1561 and after ...
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
As a result of the evaluation of the past selling records, Sati – for several years on the national and international market with a complete range of power transmission ...
The material used for these power transmission components is steel C45 according to UNI EN 10083-1 regulations.
Our range of products include also taperlock sprockets. These sprockets are made in c45. Here following the range of taperlock sprockets available is showed, divided ...
Sati can supply a wide range of bushes, that is all the standard types. Every bush can be supplied with different bore size – either in metric series (mm) or in ...
If power transmission is carried out by gear coupling, module transmission must be used. Usually the module identifies the type of the gear and it is the ratio between ...
Our range of products includes also chain. Sati chains are identified by specific regulations: European standardization refers to ISO/R 606-1982 (DIN 8187) regulations ...
V-belts have the same mechanical and quality features of the timing belts but their form fits the V- belt pulleys.
V- belts are ranked according to the profile ...
Motor slides are used to place the motor in the right seat, in order to reach the correct coupling of the transmission component mounted on it.
According to motor ...
V- belt pulleys fit V-belt so that transmission occurs by friction between the inclined sides of the belt and the pulley itself.
Adjustable pulleys are a particular ...