HANNOVER MESSE 2019,
01 - 05 April
The repeater power supply DC 52100 is used to supply and separate 2- and 3-wire transmitters and active sensor signals.
The repeater power supply supplies the transmitter with power and transmits the current or voltage measuring signal with high accuracy galvanic isolated to the output. Alternative the measuring input accepts active signals from 4-wire transmitters.
The input and output range of DC 52100 can be easily set by using DIP switch. Due to the calibrated range selection no further adjustment is necessary.
German Pavilion of Berlin-Brandenburg - Cottbus Chamber of Commerce and Industry
Universal input for Pt, Ni, TC, KTY, mA, V, mV, R, Poti, Hz, PWM
In-Rail-Bus Connector for Modbus and Power
Protective Separation up to 300 V, test voltage 3 ...
The temperature transmitter converts the Pt100 or Pt1000 sensor signal on input to temperature linear standard signal (0 to 20 mA, 4 to 20 mA or 0 to 10 V) and makes ...
Our Alarm Units are used to monitor limit values and control simple automation processes.
- Control And Monitor Standard Signals 0/4 to 20 mA, 0 to 10 V
- Monitoring ...
The Isolation Amplifier DS 75000 is used for separation and conversion of bipolar and unipolar mV-signals such as those frequently used for current measuring with ...
The Isolation Amplifier is used for isolation and conversion of bipolar and unipolar industrial signals. Due to the easy selection of the input and output ranges, ...
The Signal Splitter/Repeater DN 21000 is used for isolation, conversion and distribution of 0/4 ... 20 mA, 0/1 ... 5 V and 0/2 ... 10 V standard signals. The measuring ...
The Isolation Amplifier is used for isolation and conversion of 0 to 20 mA, 4 to 20 mA and 0 to 10 V standard signals. Due to the calibrated selection of the input ...
The loop-powered isolator provides galvanic separation for 0(4) to 20 mA standard signals, while transferring the measurement signal to the output with a high degree ...