HANNOVER MESSE 2020,
20. - 24. April
Accelerated ageing or accelerated weathering testing is carried out on products, materials and coatings that will be subjected to periods of time outside. It is used to assess the level of damage and degradation that occurs with exposure to sunlight and moisture.
We use Xenon arc lamps which simulate the full light spectrum of natural sunlight. With the ability fully programme lamp ON/OFF times and use water sprays at any time, we can create most types of climates.
The duration of any test is often set by individual product standards. If you need to put your product through specific proving, our highly experienced test engineers will work with you to create durations and cycle patterns to meet your individual requirements.
Guidance on levels exposure in relation to particular global regions can be given.
Accelerated ageing is a conditioning process and assessment tests are carried out on pre- and post- aged samples. The assessment testing prove a particular property of your product or material. Some of these tests we can carry out are:
Tensile and Flexural testing
Izod and Charpy testing
Cross cut adhesion or cross hatch testing
Colour fastness or light fastness
Testing standards relating to Xenon arc testing:
ISO 4892-2 Methods of exposure to laboratory light – Xenon Arc
BS EN 60068-2-5 Simulated solar radiation at ground level and guidance for solar radiation testing
Termate’s BP2X range of busplugs are an easy to install versatile off-load busbar plug that achieves IP2X without the need for shutters or cover assembly.
Termate manufacture a number of busbar support ranges. We have solutions for numerous phase centres, bars per phase, fault levels, size and orientation of conductors.
Termate are using the worldwide renowned Hannover exhibition to launch our new range of Low Voltage stand-off insulators.
The Aquila range has three different ...
Termate’s versatile range of through bushings are designed to allow connections to pass through enclosure walls, whilst retaining form 3 or form 4 enclosure separation ...
Termate’s Neutral Link incorporates an easy to use sliding link disconnector. This feature allows you to isolate the neutral.
Ratings of 125A; 250A; 400A; 630A; ...
Termate’s stud type terminal ranges have been always been core products ever since the inception of the company. The ranges cover stud sizes from M4 upto M12 with ...
Temperature rise testing is carried out current carrying assemblies and electrical products. It verifies that whilst in operation, surface and internal temperatures ...
The dielectric withstand, sometimes called high potential or HiPot, test is carried out on products or components to assess the effectiveness of their electrical ...
Partial discharge testing verifies that the insulation system of a component, assembly or product is able to withstand the electrical field applied to it.
Ingress protection, or more correctly International Protection, Testing is carried out on casing and enclosures. It is used to assess the degree of protection the ...
Charpy, or Charpy V-notch test, and Izod tests are both carried out on materials. They are both used to access impact strength or toughness of the material. This ...
Auf der Merkliste