HANNOVER MESSE 2020,
20. - 24. April
European Sensor Systems (ES) has developed a series of pressure sensor transmitters featuring very good accuracy in combination with low cost. Each module is based on all welded hermetically sealed structure in a single stainless-steel piece. The ESPP-MIT1 Series is a medium isolated pressure sensor suitable for gas or fluid pressure measurements in harsh environments.
The output is fully calibrated and temperature compensated based on the internal temperature sensor and the factory calibration coefficients which are stored in the embedded memory. Thus, the transducer is ready to be installed directly to the end user system without further processing.
ESPP-MIT1 Series comes with a variety of electrical interfaces output signal types and process interfaces. It is one of the most cost-effective solution especially when high volumes are required.
Pressure Type: Gauge
Pressure Range:Up to 400 bar
Power Supply: +8V … +32V
Total Error: Operating Temperature: -40C … +125C
Compensation Temperature:-10C … +80C
Output Interface: Calibrated Pressure
Output: 4-20mA, 0.5 – 4.5V, 1-5V
Overpressure Tolerance: Up to 5x
Media Compatibility: Gases, Liquids
Material: Stainless Steel 17- 4PH
Connection Type: M12, ISO4400, Cable
Pneumatic Interface: G1/2”, G/14”, ½” NPT, ¼” NPT
Dimensions: Height: 66.5 mm | diameter Ø 23.5 mm
ES Systems has developed a series of medium isolated pressure sensors suitable for applications with harsh environmental conditions where resistance to corrosive ...
ES Systems has developed a series of board mountable pressure sensors targeting a variety of markets requiring high resolution and accuracy for absolute, gauge or ...
ES Systems has developed a series of medium isolated pressure transmitters suitable for applications with harsh environmental conditions where resistance to corrosive ...
ES Systems has developed an environmental sensing board system featuring multiple sensors for environmental monitoring that can be utilized in a variety of applications ...
ES Systems has developed a complete smart system solution for condition monitoring of industrial equipment. The ESMS-ECM system features synchronous sensor sampling ...
ES Systems has developed ESRF-ESF Series, a MEMS gas flow meter family, based on the hot-film anemometer principle for mass flow measurements.
ESRF-ESF Series gas ...
ES Systems has developed ESRF-HF Series, a family of insertion gas flow transmitters, based on the hot-film anemometer principle for mass gas flow measurements.
Auf der Merkliste